The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Thu Mar 28, 2024 1:50 pm

All times are UTC




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: FAO DavePoth
PostPosted: Fri Oct 20, 2006 12:28 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Tue Oct 03, 2006 9:45 pm
Posts: 11179
Location: Middlesex
Hi Dave. I hear from Mr Davis that you need an eyebrow panel.
Well blow me down if one hasnt come up on the bay...
Trouble is you will have to fight Mr Fox for it.

I'm not sure why he needs it cos I dont remember his brown job being too bad in that area...

Maybe he's listening too...and would care to comment.

I may compete for the headlamp panels as I have a 1300 or two to convert...

I'd get some jenolite, primer and sealer (waxoyl or similar) in those body seams quick too...

Once dipped, the damp gets to work pdq...

Jonners

_________________
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.


Top
   
 Post subject:
PostPosted: Fri Oct 20, 2006 12:53 pm 
Offline
TDC Events Officer
User avatar

Joined: Tue Oct 03, 2006 4:50 pm
Posts: 5723
Location: Next to my Computer
Thanks for the tip Jonners.


Top
   
 Post subject:
PostPosted: Fri Oct 20, 2006 1:33 pm 
Dave for some reason I thought you'd had your car stripped by SPL, but there's clearly paint in the welding pictures you put up recently. am I getting mixed up with someone else?

David


Top
   
 Post subject:
PostPosted: Fri Oct 20, 2006 2:09 pm 
Offline
TDC Events Officer
User avatar

Joined: Tue Oct 03, 2006 4:50 pm
Posts: 5723
Location: Next to my Computer
No, that's mine. I got them to do a coat of weld through primer to give it a little bit of protection before it was welded.


Top
   
 Post subject:
PostPosted: Fri Oct 20, 2006 2:57 pm 
How much was it, and do you know how much the electrophoretic coating is?

David


Top
   
 Post subject:
PostPosted: Fri Oct 20, 2006 2:59 pm 
Offline
TDC Events Officer
User avatar

Joined: Tue Oct 03, 2006 4:50 pm
Posts: 5723
Location: Next to my Computer
£1,000 for the dipping and priming, I think the electrophoretic coating was around 800 quid.


Top
   
 Post subject:
PostPosted: Fri Oct 20, 2006 9:19 pm 
I wasn't sure if you'd seen my reply to the originl thread Dave but I'll repeat here :P :

"I have a pair if you still need them. One is a genuine, one is pattern but I can't remember which side is which! I'll have a look"


Top
   
 Post subject:
PostPosted: Sat Oct 21, 2006 10:10 am 
Offline
TDC Events Officer
User avatar

Joined: Tue Oct 03, 2006 4:50 pm
Posts: 5723
Location: Next to my Computer
So many offers...If the one Alun takes off his car is OK, I'll go with that, he's sending me another panel anyway, so it saves a trip to the post office. But thanks for the offers everyone!


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC


Who is online

Users browsing this forum: Google and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited