The Triumph Dolomite Club - Discussion Forum
http://forum.triumphdolomite.co.uk/

Front and Rear Quarterlight Rubbers
http://forum.triumphdolomite.co.uk/viewtopic.php?t=30756
Page 1 of 3

Author:  James467 [ Tue Mar 29, 2016 2:23 pm ]
Post subject:  Front and Rear Quarterlight Rubbers

If I can get the front and rear quarterlight rubbers remanufactured what would the demand be?

What I'm talking about are the rear QL Rubber part 708692 and 708693

and the fronts part 808956 and 808957. On the fronts, not the rubber strip that seats the glass, as per the photo below the rubber seal that seals the QL frame to the outer frame.
Attachment:
_MG_7148.jpg
_MG_7148.jpg [ 143.76 KiB | Viewed 2750 times ]

Author:  Mahesh [ Tue Mar 29, 2016 3:44 pm ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

Would be interested in a full set, as all of mine have dried up with cracks in them.

Author:  Jon Tilson [ Tue Mar 29, 2016 6:58 pm ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

Given the world population of dolomites is 2500 I would have though the market is 2400...

Jonners

Author:  mahony [ Tue Mar 29, 2016 6:59 pm ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

I would be interested in a rear set :D

Author:  Pippin [ Tue Mar 29, 2016 10:30 pm ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

Someone recently paid almost £40 for a NOS front one:

http://www.ebay.co.uk/itm/Triumph-Dolom ... 7675.l2557

and two losing bidders were happy to offer almost as much.

Author:  Carledo [ Tue Mar 29, 2016 10:46 pm ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

I could use a front pair and a full set.

Steve

Author:  Galileo [ Tue Mar 29, 2016 11:01 pm ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

I'd buy a set if priced at something a bit more reasonable than the £295 a pair I got quoted for as a custom made replacement by Edgeware Motor Rubber and Trim.

Author:  tony g [ Wed Mar 30, 2016 3:11 am ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

Price dependant but a car set for me too :thumbsup:

Tony

Author:  OBJ [ Wed Mar 30, 2016 8:15 am ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

Me too please, depending on price!

Author:  SprintMWU773V [ Wed Mar 30, 2016 9:13 am ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

What you might find is that there's already a similar extrusion that can be modified for our purpose, this would significantly reduce the cost. I know when screen rubbers were discussed the other year I did investigate a run via Sprintparts in Aus but the price was prohibitive and to be honest the manufacturer was not really interested.

Always happy to support these sorts of ventures if there's demand. I personally don't need any right now but who knows, I may do in the future.

Author:  James467 [ Wed Mar 30, 2016 10:28 am ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

Great, thanks everyone.

Keep posting here if you are interested so I can get an idea of numbers.

Author:  ragtop [ Wed Mar 30, 2016 9:41 pm ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

If same as Toledo, pair of fronts depending on price.

Author:  HQentity [ Thu Mar 31, 2016 12:14 am ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

Definitely wouldn't say no to some, especially fronts :)

Author:  bazyerma [ Thu Mar 31, 2016 1:05 pm ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

Me too!

Author:  Jon Tilson [ Thu Mar 31, 2016 6:40 pm ]
Post subject:  Re: Front and Rear Quarterlight Rubbers

You would easilly sell a run of fifty car sets.

Get 100 done and put the slow sellers in club stock. They won't last a year I reckon.

I'll have 2 car sets at the right price.

Jonners

Page 1 of 3 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/