The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
Front and Rear Quarterlight Rubbers http://forum.triumphdolomite.co.uk/viewtopic.php?t=30756 |
Page 1 of 3 |
Author: | James467 [ Tue Mar 29, 2016 2:23 pm ] |
Post subject: | Front and Rear Quarterlight Rubbers |
If I can get the front and rear quarterlight rubbers remanufactured what would the demand be? What I'm talking about are the rear QL Rubber part 708692 and 708693 and the fronts part 808956 and 808957. On the fronts, not the rubber strip that seats the glass, as per the photo below the rubber seal that seals the QL frame to the outer frame. Attachment: _MG_7148.jpg [ 143.76 KiB | Viewed 2841 times ] |
Author: | Mahesh [ Tue Mar 29, 2016 3:44 pm ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
Would be interested in a full set, as all of mine have dried up with cracks in them. |
Author: | Jon Tilson [ Tue Mar 29, 2016 6:58 pm ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
Given the world population of dolomites is 2500 I would have though the market is 2400... Jonners |
Author: | mahony [ Tue Mar 29, 2016 6:59 pm ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
I would be interested in a rear set |
Author: | Pippin [ Tue Mar 29, 2016 10:30 pm ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
Someone recently paid almost £40 for a NOS front one: http://www.ebay.co.uk/itm/Triumph-Dolom ... 7675.l2557 and two losing bidders were happy to offer almost as much. |
Author: | Carledo [ Tue Mar 29, 2016 10:46 pm ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
I could use a front pair and a full set. Steve |
Author: | Galileo [ Tue Mar 29, 2016 11:01 pm ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
I'd buy a set if priced at something a bit more reasonable than the £295 a pair I got quoted for as a custom made replacement by Edgeware Motor Rubber and Trim. |
Author: | tony g [ Wed Mar 30, 2016 3:11 am ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
Price dependant but a car set for me too Tony |
Author: | OBJ [ Wed Mar 30, 2016 8:15 am ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
Me too please, depending on price! |
Author: | SprintMWU773V [ Wed Mar 30, 2016 9:13 am ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
What you might find is that there's already a similar extrusion that can be modified for our purpose, this would significantly reduce the cost. I know when screen rubbers were discussed the other year I did investigate a run via Sprintparts in Aus but the price was prohibitive and to be honest the manufacturer was not really interested. Always happy to support these sorts of ventures if there's demand. I personally don't need any right now but who knows, I may do in the future. |
Author: | James467 [ Wed Mar 30, 2016 10:28 am ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
Great, thanks everyone. Keep posting here if you are interested so I can get an idea of numbers. |
Author: | ragtop [ Wed Mar 30, 2016 9:41 pm ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
If same as Toledo, pair of fronts depending on price. |
Author: | HQentity [ Thu Mar 31, 2016 12:14 am ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
Definitely wouldn't say no to some, especially fronts |
Author: | bazyerma [ Thu Mar 31, 2016 1:05 pm ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
Me too! |
Author: | Jon Tilson [ Thu Mar 31, 2016 6:40 pm ] |
Post subject: | Re: Front and Rear Quarterlight Rubbers |
You would easilly sell a run of fifty car sets. Get 100 done and put the slow sellers in club stock. They won't last a year I reckon. I'll have 2 car sets at the right price. Jonners |
Page 1 of 3 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |