Blimey, I'd better up production then!
I'm going to bring the prototype to Stoneleigh so people can have a look at it.
| The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
| Slant engine mount stand adapters http://forum.triumphdolomite.co.uk/viewtopic.php?t=33574 |
Page 2 of 4 |
| Author: | thekettleson [ Sat Feb 03, 2018 7:52 pm ] |
| Post subject: | Re: Slant engine mount stand adapters |
Yes please - one wanted here when they become available |
|
| Author: | PaulB [ Tue Feb 06, 2018 5:51 pm ] |
| Post subject: | Re: Slant engine mount stand adapters |
And another for me please..... Thanks. |
|
| Author: | oldred [ Wed Feb 07, 2018 12:19 pm ] |
| Post subject: | Re: Slant engine mount stand adapters |
I'll have one as well please. Thanks. Phil. |
|
| Author: | Carledo [ Wed Feb 07, 2018 11:10 pm ] |
| Post subject: | Re: Slant engine mount stand adapters |
12 so far James, plus your own prototype, AMAZING! Sorry you won't be selling me one, but Vauxhll engines don't go wrong often enough to need one! (insert "smug" smiley here) Steve |
|
| Author: | James467 [ Wed Feb 07, 2018 11:14 pm ] |
| Post subject: | Re: Slant engine mount stand adapters |
Blimey, I'd better up production then! I'm going to bring the prototype to Stoneleigh so people can have a look at it. |
|
| Author: | soe8m [ Fri Feb 09, 2018 8:10 am ] |
| Post subject: | Re: Slant engine mount stand adapters |
Can I have five please? Jeroen |
|
| Author: | James467 [ Fri Feb 09, 2018 8:34 am ] |
| Post subject: | Re: Slant engine mount stand adapters |
 I need to employ some cheap labour! At what age is it legal to A. Make children work B. Allow a child to use a welder! 
|
|
| Author: | Magenta Auto Sprint [ Fri Feb 09, 2018 8:59 am ] |
| Post subject: | Re: Slant engine mount stand adapters |
perhaps you could find some 15 year old design technology students and sell them the idea of production engineering. |
|
| Author: | tom16v [ Sat Feb 10, 2018 6:09 pm ] |
| Post subject: | Re: Slant engine mount stand adapters |
Me too please James. 
|
|
| Author: | James467 [ Thu Mar 29, 2018 11:01 am ] |
| Post subject: | Re: Slant engine mount stand adapters |
I'm still recovering from tonsillitis but I plan to order the materials next week to make up the first batch of 20. |
|
| Author: | VanIsleSprint [ Fri Mar 30, 2018 5:28 am ] |
| Post subject: | Re: Slant engine mount stand adapters |
I would like one as well. Postage to me will be more! Doug |
|
| Author: | Mad Mart [ Thu May 03, 2018 6:00 pm ] | |||||
| Post subject: | Re: Slant engine mount stand adapters | |||||
I've been evaluating James' prototype as I am in the middle of an engine rebuild myself. Why didn't I make one of these years ago?  It does exactly what it says on the tin. It's much more stable, especially when you have the head on as well, and it means you can get to the rear crankshaft oil seal plate. It also allows you to bolt on the flywheel, clutch and adaptor plates. It makes it a bit more difficult if you're painting the block but the pros far outweigh the cons. James, you need to get cracking!
|
||||||
| Author: | dursley92 [ Sat May 05, 2018 4:10 pm ] |
| Post subject: | Re: Slant engine mount stand adapters |
Quote:
I've been evaluating James' prototype as I am in the middle of an engine rebuild myself. Why didn't I make one of these years ago?
I like the neat bit of wire locking on the timing gear in the last picture.
It does exactly what it says on the tin. It's much more stable, especially when you have the head on as well, and it means you can get to the rear crankshaft oil seal plate. It also allows you to bolt on the flywheel, clutch and adaptor plates. It makes it a bit more difficult if you're painting the block but the pros far outweigh the cons. James, you need to get cracking!
|
|
| Author: | James467 [ Mon May 07, 2018 10:33 pm ] |
| Post subject: | Re: Slant engine mount stand adapters |
Quote: James, you need to get cracking!
I do, need to get DTR finished first!
|
|
| Author: | dursley92 [ Wed Aug 01, 2018 12:18 am ] |
| Post subject: | Re: Slant engine mount stand adapters |
James, any news on the adapters yet? I have just put a "new" Sprint engine on the stand but not happy with mounting it on the flywheel end. 
|
|
| Page 2 of 4 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|