The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
Slant engine mount stand adapters http://forum.triumphdolomite.co.uk/viewtopic.php?t=33574 |
Page 3 of 4 |
Author: | GaryR22 [ Mon Aug 06, 2018 9:09 am ] |
Post subject: | Re: Slant engine mount stand adapters |
Hi James I’ve just taken my 1850 engine and gearbox out on Saturday and was wondering how on earth to fit the engine to my recently purchased stand and was very dubious about trying to use the puny bell housing bolts. Thought I would do a topic search this morning and saw your thread. Clearly the last comment was a couple of months back - are you in production yet? I could certainly do with one please. PS: I’ve not paid much attention to the exhaust manifold side of the block and forgive my ignorance - where do the bolts from your excellent bracket connect? |
Author: | Mad Mart [ Mon Aug 06, 2018 9:22 am ] |
Post subject: | Re: Slant engine mount stand adapters |
I usually remove the engine/gearbox adaptor plates, clutch, flywheel & rear crankshaft seal plate and bolt directly to the block, if you need to get on with it of course, but if you can wait for James' adaptor they are great. |
Author: | SprintMWU773V [ Mon Aug 06, 2018 4:27 pm ] |
Post subject: | Re: Slant engine mount stand adapters |
What's the current score on the adaptors James? Am very much at that point where I need to dress my engine with flywheel, clutch and head prior to install. Life will be much easier if I can use the stand rather than a crane which I have not yet purchased. |
Author: | James467 [ Tue Aug 21, 2018 9:58 pm ] |
Post subject: | Re: Slant engine mount stand adapters |
Hi all, apologies I've been really swamped with the kids and school holidays. They are in the pipeline, I just need to order the materials. I wouldn't build it from Ali. I don't think it would take the torsion involved. Currently I'm using 4mm box section gusseted. Once I have done Aluns TR I'll try and get the materials ordered then I can take some orders. Cheers! |
Author: | yorkshire_spam [ Sun Sep 02, 2018 8:14 am ] |
Post subject: | Re: Slant engine mount stand adapters |
Looking good Shaun! |
Author: | dursley92 [ Wed Nov 07, 2018 12:23 am ] |
Post subject: | Re: Slant engine mount stand adapters |
Quote:
Hi all, apologies I've been really swamped with the kids and school holidays.
Any news on the brackets yet please?They are in the pipeline, I just need to order the materials. I wouldn't build it from Ali. I don't think it would take the torsion involved. Currently I'm using 4mm box section gusseted. Once I have done Aluns TR I'll try and get the materials ordered then I can take some orders. Cheers! Thanks Russ Cooper |
Author: | James467 [ Thu Jan 24, 2019 5:14 pm ] |
Post subject: | Re: Slant engine mount stand adapters |
Hi all, I am just ordering the materials to produce the first batch. EDIT - The materials have been ordered and are due to be delivered at the beginning of February. The first one will take me at least a day to make as I will need to make up some jigs, the rest then and others will be quicker to produce. |
Author: | tony g [ Thu Jan 24, 2019 8:10 pm ] |
Post subject: | Re: Slant engine mount stand adapters |
How much James? Sorry if its been covered before but as I need 2 and things may have changed pricewise i may be a double candidate Tony |
Author: | dursley92 [ Mon Jan 28, 2019 4:50 pm ] |
Post subject: | Re: Slant engine mount stand adapters |
Great news, now I will have no excuse not to get on with building my Sprint engine. |
Author: | James467 [ Mon Feb 04, 2019 11:29 am ] |
Post subject: | Re: Slant engine mount stand adapters |
Metal stock has arrived this morning for the first batch. Will start making them at the weekend. |
Author: | James467 [ Sat Feb 09, 2019 3:41 pm ] |
Post subject: | Re: Slant engine mount stand adapters |
Production has started... |
Author: | hsdolly [ Tue Feb 12, 2019 10:48 am ] |
Post subject: | Re: Slant engine mount stand adapters |
As long as fits Sprint engine, I will have one too please. Ta |
Author: | James467 [ Thu Feb 28, 2019 9:44 pm ] |
Post subject: | Re: Slant engine mount stand adapters |
Hi all, production is slowly progressing. Producing one is easy but a batch is more challenging! I have had to make some jigs etc... Shouldn't be long now. |
Author: | James467 [ Mon Mar 11, 2019 12:55 pm ] |
Post subject: | Ordering Instructions |
I now have the first 16 ready for sale, these have been hand finished and test fitted. They will be supplied boxed and with instructions on how to use (although that is pretty self explanatory!!). Selling price is £40 plus postage, postage to anywhere in the UK will be around £5 via tracked courier. Payment to be made via bank transfer or cash if you collect from me. Sales are on a first come first served basis, if I do run out please don't despair, I will make another batch. Unfortunately I cannot take them to a show, they are quite heavy and bulky and trying to transport a bunch of them into the NEC (for example) will be difficult. To purchase please PM me with the following information: Name: Club Membership Number: Address: Delivery Address (if different): Contact Telephone: Email address: Quantity Required: I will reply confirming stock and give you my bank details for payment. |
Page 3 of 4 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |