So long as they are fitted as a pair, it will be quite safe. As for improving the brakes, i doubt you will notice any differance. Just make sure they are adjusted right
Tony.
| The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
| Brake slave bore http://forum.triumphdolomite.co.uk/viewtopic.php?t=34153 |
Page 1 of 1 |
| Author: | AlanH [ Thu Jul 05, 2018 10:33 pm ] |
| Post subject: | Brake slave bore |
I need to replace one of my brake cylinders which, according to rimmers, is 11/16 bore (my comm number is WF67926) Would it be OK to change them both to the later 5/8 bore and would this improve the breaking. |
|
| Author: | dollyman [ Fri Jul 06, 2018 8:59 am ] |
| Post subject: | Re: Brake slave bore |
So long as they are fitted as a pair, it will be quite safe. As for improving the brakes, i doubt you will notice any differance. Just make sure they are adjusted right Tony. |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|