Hi Steve,
Are we talking about HU0805 as shown here:
If so the hardware catalogue lists it as:
5/16" UNF @ 5/8" length.
http://tecb.eu/onewebmedia/Standard_Tri ... atalog.pdf
Cheers,
Sam
| The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
| Engine Mount on 1850HL Dolomite Auto http://forum.triumphdolomite.co.uk/viewtopic.php?t=34800 |
Page 1 of 1 |
| Author: | tomcat784 [ Sun Mar 17, 2019 10:00 am ] |
| Post subject: | Engine Mount on 1850HL Dolomite Auto |
Hi,im new to this forum, Ive recently bought a triumph dolomite 1850HL auto 1978 The offside engine mount has got the top bolt missing,going into the engine block would anybody be able to tell me what size this bolt is. Thanks Steve. |
|
| Author: | yorkshire_spam [ Sun Mar 17, 2019 12:38 pm ] |
| Post subject: | Re: Engine Mount on 1850HL Dolomite Auto |
Hi Steve, Are we talking about HU0805 as shown here: If so the hardware catalogue lists it as: 5/16" UNF @ 5/8" length. http://tecb.eu/onewebmedia/Standard_Tri ... atalog.pdf Cheers, Sam |
|
| Author: | tomcat784 [ Sun Mar 17, 2019 6:27 pm ] |
| Post subject: | Re: Engine Mount on 1850HL Dolomite Auto |
Hi Sam, Thanks for your help,much appreciated That was the information i needed. Cheers Steve. 
|
|
| Author: | yorkshire_spam [ Sun Mar 17, 2019 6:31 pm ] |
| Post subject: | Re: Engine Mount on 1850HL Dolomite Auto |
You are welcome! Us 1850 Auto owners have to stick together! 
|
|
| Author: | soe8m [ Sun Mar 17, 2019 6:47 pm ] |
| Post subject: | Re: Engine Mount on 1850HL Dolomite Auto |
Quote:
You are welcome! Us 1850 Auto owners have to stick together!
 Jeroen |
|
| Author: | dollyman [ Sun Mar 17, 2019 7:25 pm ] |
| Post subject: | Re: Engine Mount on 1850HL Dolomite Auto |
Quote:
You are welcome! Us 1850 Auto owners have to stick together!
I will second that Sam
Nothing wrong with auto's Jeroen Tony. |
|
| Author: | MIG Wielder [ Sun Mar 17, 2019 9:50 pm ] |
| Post subject: | Re: Engine Mount on 1850HL Dolomite Auto |
Quote:
You are welcome! Us 1850 Auto owners have to stick together!
I'll second that ! Welcome to the forum.
My later 1850 parts book gives that bolt as part no SH605051 plus a spring washer GHF332. Which Mr Rimmer's useful cross reference says is Part No.: SH606051 Screw - 3/8 inch UNF x 5/8 inch - SH606051 So a set-screw rather than a bolt. Near enough to the item that Sam mentions. Tony. |
|
| Author: | tomcat784 [ Sun Apr 14, 2019 7:58 pm ] |
| Post subject: | Re: Engine Mount on 1850HL Dolomite Auto |
hi Tony sorry i havent replied before now, thankyou for the information i have now sorted this problem out cheers steve
|
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|