| The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
| Front windscreen rubber http://forum.triumphdolomite.co.uk/viewtopic.php?t=35048 |
Page 1 of 2 |
| Author: | GrahamFountain [ Wed Jun 12, 2019 12:38 pm ] |
| Post subject: | Front windscreen rubber |
Wondering it anybody's had a winscreen rubber recently and got advice where/not to go? Graham |
|
| Author: | RSi [ Wed Jun 12, 2019 12:52 pm ] |
| Post subject: | Re: Front windscreen rubber |
Quote:
Wondering it anybody's had a winscreen rubber recently and got advice where/not to go?
I've just replaced both front and rear, and they were a perfect fit - I'll check where I got them when I get home.
Graham |
|
| Author: | TrustNo1 [ Wed Jun 12, 2019 6:58 pm ] |
| Post subject: | Re: Front windscreen rubber |
I think chris witor sell them but wherever you get them they are very likely to be made by Baines |
|
| Author: | GTS290N [ Wed Jun 12, 2019 9:19 pm ] |
| Post subject: | Re: Front windscreen rubber |
Chris Witor does the rear early style rear windscreen rubber (no trim, possibly non Sprint) as used in 1850's up to the non HL style in EPDM rubber, so I'm sure it's not Baines. Others - Baines. My front rubber supplied by MEV took a while to settle in and needed some (lots) of old school sealant before it stopped leaking but that was some years ago now. |
|
| Author: | xvivalve [ Wed Jun 12, 2019 10:38 pm ] |
| Post subject: | Re: Front windscreen rubber |
MEV Spares sell the rubber and insert for the same price most folk just sell the rubber for. |
|
| Author: | GrahamFountain [ Thu Jun 13, 2019 7:50 am ] |
| Post subject: | Re: Front windscreen rubber |
Quote:
MEV Spares sell the rubber and insert for the same price most folk just sell the rubber for.
Out of stockGraham |
|
| Author: | xvivalve [ Thu Jun 13, 2019 8:20 am ] |
| Post subject: | Re: Front windscreen rubber |
Try the Baines website direct; cheaper still! |
|
| Author: | sprint95m [ Thu Jun 13, 2019 9:38 am ] |
| Post subject: | Okay… |
Quote:
Chris Witor does the rear early style rear windscreen rubber (no trim, possibly non Sprint) as used in 1850's up to the non HL style in EPDM rubber, so I'm sure it's not Baines.
From what I have read in the T2000 Register magazine,Others - Baines. My front rubber supplied by MEV took a while to settle in and needed some (lots) of old school sealant before it stopped leaking but that was some years ago now. Chris commissioned the tooling for the back window seals and has Baines actually using this to produce seals to his specification. Ian. |
|
| Author: | GrahamFountain [ Thu Jun 13, 2019 12:55 pm ] |
| Post subject: | Re: Front windscreen rubber |
Quote:
Try the Baines website direct; cheaper still!
Couldn't find it on their wibsite, so rang direct. Problem is they don't have it listed themselves against the Dolomite - they think the insert strip is PT 11. So, without their part number, they can't give me a price or anything.Anybody got the Baines part number for the front windscreen rubber? Graham |
|
| Author: | RSi [ Thu Jun 13, 2019 4:45 pm ] |
| Post subject: | Re: Front windscreen rubber |
Quote: Quote:
Try the Baines website direct; cheaper still!
Couldn't find it on their wibsite, so rang direct. Problem is they don't have it listed themselves against the Dolomite - they think the insert strip is PT 11. So, without their part number, they can't give me a price or anything.Anybody got the Baines part number for the front windscreen rubber? Graham |
|
| Author: | RSi [ Thu Jun 13, 2019 5:36 pm ] |
| Post subject: | Re: Front windscreen rubber |
I got 2 lots. A 12m roll from Baines costing £22.13 with posting and was part No: PT 11 - I got front and back from Chris Witor @ £5 each + VAT and these are the ones I used. My rubbers came from Rimmers and supplied to them by Baines. |
|
| Author: | GrahamFountain [ Thu Jun 13, 2019 6:41 pm ] |
| Post subject: | Re: Front windscreen rubber |
Unfortunately gRimmer Bros list it under the original PN, and Baines didn't recognize that. Graham |
|
| Author: | xvivalve [ Thu Jun 13, 2019 9:11 pm ] |
| Post subject: | Re: Front windscreen rubber |
I smell a closed shop; I'm almost certain they used to list it on their own site as I looked following Trust No1's comment on this thread: https://forum.triumphdolomite.co.uk/vie ... ct#p319268 and was surprised they were only about £20! |
|
| Author: | DOLOMITE 135 [ Thu Jun 13, 2019 11:52 pm ] |
| Post subject: | Re: Front windscreen rubber |
Quote:
I smell a closed shop; I'm almost certain they used to list it on their own site as I looked following Trust No1's comment on this thread:
Is this the listing you remember? https://coh-baines.co.uk/product/triump ... pe-hd7434/https://forum.triumphdolomite.co.uk/vie ... ct#p319268 and was surprised they were only about £20! The title is somewhat confusing, but the description states suitable for the 1300 / 1500 and Toledo (which share the same windscreen surround panel as the Dolomite), so perhaps for a toughened rather than a laminated windscreen? I think I remember discussion on here before, that the two types of screens had different rubbers due to their different thickness's, but that only one type is still made. |
|
| Author: | xvivalve [ Fri Jun 14, 2019 7:27 am ] |
| Post subject: | Re: Front windscreen rubber |
Quote: Is this the listing you remember? https://coh-baines.co.uk/product/triump ... pe-hd7434/
I don’t recall it referencing the 2000 as well....surely we don’t share ‘screens with the big saloons, do we???I only ever managed to find the one part number for ‘screen seals, had it changed with glass type there’d be a new number... |
|
| Page 1 of 2 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|