The Triumph Dolomite Club - Discussion Forum
http://forum.triumphdolomite.co.uk/

Front windscreen rubber
http://forum.triumphdolomite.co.uk/viewtopic.php?t=35048
Page 2 of 2

Author:  xvivalve [ Fri Jun 14, 2019 7:28 am ]
Post subject:  Re: Front windscreen rubber

Does anyone have a 2000 parts book?

Author:  DOLOMITE 135 [ Fri Jun 14, 2019 9:47 am ]
Post subject:  Re: Front windscreen rubber

Quote:
Quote:
Is this the listing you remember? https://coh-baines.co.uk/product/triump ... pe-hd7434/
I don’t recall it referencing the 2000 as well....surely we don’t share ‘screens with the big saloons, do we???

I only ever managed to find the one part number for ‘screen seals, had it changed with glass type there’d be a new number...
I think Baines have a cut and paste error on their website, as the 2000 has a separate listing under another part number, maybe this is why they do not include Dolomite in their listing.

https://coh-baines.co.uk/product-catego ... -surround/



I think this is the forum thread I was thinking of with regards to the two different seals:

https://forum.triumphdolomite.co.uk/vie ... al#p304286

The discussion I think lends itself to the conclusion there is only one seal in the end for the front windscreen, and having had time to check my parts books I can only find part no. 904111 listed from the 1300FWD onwards.

I note that Baines list the seals as being made from EPDM, have they changed the material they use I wonder or, did they not previously advertise this fact, as on the thread referenced above sprint95m talks of having thought about commissioning a batch of EPDM front Dolomite seals but changed his mind.

Author:  GrahamFountain [ Fri Jun 14, 2019 12:47 pm ]
Post subject:  Re: Front windscreen rubber

So we reckon it's ES 44 + PT 11 for the Dolomite then?
How much of the plastic trim is needed, is 3m enough, or do I want 4 or even more?

Graham

Author:  Carledo [ Fri Jun 14, 2019 11:23 pm ]
Post subject:  Re: Front windscreen rubber

Quote:
So we reckon it's ES 44 + PT 11 for the Dolomite then?
How much of the plastic trim is needed, is 3m enough, or do I want 4 or even more?

Graham
A very rough guesstimate gives me somewhere between 11 and 12 foot so I would say 4m at least.

Steve

Page 2 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/