| The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
| Speedo nut size http://forum.triumphdolomite.co.uk/viewtopic.php?t=35456 |
Page 1 of 1 |
| Author: | RichardHyde [ Mon Dec 09, 2019 6:16 pm ] |
| Post subject: | Speedo nut size |
Hi, does anybody know or could measure the dimensions of the speedo instrument thread eg thread, diameter and length ? Thanks, Richard |
|
| Author: | new to this [ Tue Dec 10, 2019 10:34 pm ] |
| Post subject: | Re: Speedo nut size |
Richard the nut comes with the speedo cable,what bit are you after Dave |
|
| Author: | xvivalve [ Wed Dec 11, 2019 9:42 am ] |
| Post subject: | Re: Speedo nut size |
It looks to be 5/8" UNC Actual thread length is ~ 11 mm, but there's a further ~ 1-1.5 mm shoulder on the alloy spigot, there's then a further brass shoulder protruding from the alloy which is ~8 mm long and ~10 mm ΓΈ |
|
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|