The Triumph Dolomite Club - Discussion Forum

I suspect the hinges are the same ( not 100 % sure ), but you can repair the hinges with new pins

https://www.ebay.co.uk/p/690957285?iid= ... gL9JPD_BwE

Thanks think ive got 2 hinges to repair , 1 bent 1 worn

Dave

The rear top and bottom hinges are different to EACH OTHER and the rear upper hinge has an offset bolt pattern where it bolts to the post which makes it handed as well. The front hinge is all 4 the same (616393) rear hinge lower is 2 x 616396 and rear upper is 617431 (RH) and 617430 (LH)

HTH Steve

EDIT, I have quite a few of each in usable condition and several colours (no yellow ones though!)

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.

Hi Steve,

Just piggybacking on this thread a little bit.

I am sorting some hinges out for powder coating, however it has occurred to me that I need to dismantle them into their component parts so they dont get bunged up with paint.

Would you happen to have any tips on how to remove the pins?

TIA

Pete

_________________
1980 Dolomite Sprint Track Day Car....KLJ 895W. now redtopiffied

viewtopic.php?f=19&t=23031

Volkswagen Golf MK3 Gti....R301UUJ. RIP 22-5-13
Volkswagen Golf MK4 TDGTI 150 MM53VNT Sold 7-8-17
BMW 320d Coupe M-Sport YL08 XBZ with factory fitted Performance Pack - Sold 22/05/21
BMW 330d Touring M-Sport WN63 XPY - best daily ever

Proud TDC Member!

_________________
Some people are like Slinky's, they serve no real purpose in life but bring a smile to your face when you push them down the stairs.

I took mine in to a machine shop to be repaired, so didnt take mine apart,but the guy said they were hard to get the pins out

Dave