The Triumph Dolomite Club - Discussion Forum

An absolutely trivial issue, but in what direction should the winder handles point when the window is fully raised to minimize being knocked, and the window opening a bit, when you get out of the car?

Graham

_________________
The 16v Slant 4 engine is more fun than the 3.5 V8, because you mostly drive it on the upslope of the torque curve.

Factory 1977 TR7 Sprint FHC VVC 697S (Now all of, but still needs putting together)
B&Y 73 Dolomite Sprint UVB 274M (kids!)
1970 Maroon 13/60 Herald Convertable (wife's fun car).

I like mine to point forwards. If you think of a clock face, at nine o'clock. That seems to be best for me.

_________________
Mike
(1969 MGB GTV8, 1977 Dolomite 1850HL, 1971 MGB roadster now all three on the road)

It annoys my OCD that you never seem to be able to get all 4 the same!

Mainly, I think because the spindle the handle fits to is 4 sided and the drive gear on the mechanism has 8 teeth (or thereabouts, haven't counted one lately) But the gear can be fitted in a different relationship to the quadrant and still work, I don't think they cared enough at the manufacurers to get them all aligned the same.

I do TRY to get them all similar but I prefer the 6 o'clock position, (or 7.30, 4.30 on the N/S) then if you do nudge it, it's usually in the closing direction.

Steve

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.