The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Thu Mar 28, 2024 8:07 pm

All times are UTC




Post new topic  Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Fri Nov 26, 2021 6:16 pm 
Offline
TDC Member
User avatar

Joined: Sun Dec 08, 2013 8:03 am
Posts: 299
Location: High Wycombe
Evening all,
What solutions do you have to connect the Ford callipers to the standard Triumph flexi ?
Thanks, Richard


Top
   
PostPosted: Fri Nov 26, 2021 6:29 pm 
Offline
TDC Member
User avatar

Joined: Mon Dec 13, 2010 8:17 pm
Posts: 412
Location: Gapinge (NL)
I contacted rallydesign.co.uk and ordered "195mm CUT LINE S6091-03P - S445-31P"
Cost me about 20 quid 8 years ago


Top
   
PostPosted: Fri Nov 26, 2021 7:51 pm 
Offline
TDC Shropshire Area Organiser

Joined: Sun Aug 21, 2011 5:12 pm
Posts: 7013
Location: Highley, Shropshire
I've had these made, after a lot of development, I arrived at this handed design, over 20 pairs sold in the last few years.


Image

Sorry they aren't twenty quid! They come out at £65 per pair including UK postage, I have some in stock.

Steve

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.


Top
   
PostPosted: Fri Nov 26, 2021 8:21 pm 
Offline
TDC Member

Joined: Mon Dec 12, 2016 9:53 pm
Posts: 1699
Location: Harrow Middlesex
Any one know what size threads are used on the Trackerjack hoses ?



Top
   
PostPosted: Fri Nov 26, 2021 9:45 pm 
Offline
TDC Shropshire Area Organiser

Joined: Sun Aug 21, 2011 5:12 pm
Posts: 7013
Location: Highley, Shropshire
Quote:
Any one know what size threads are used on the Trackerjack hoses ?

3/8" UNF on the female end and 10mmx1 on the caliper end.

Steve

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.


Top
   
PostPosted: Sat Nov 27, 2021 9:58 am 
Offline
TDC Member
User avatar

Joined: Tue Oct 03, 2006 5:48 pm
Posts: 8446
Location: Winscombe, North Somerset, England
I just used copper brake pipe. Technically incorrect but there is enough 'give' in the copper. Never had any problems and they're still on PKN afaik...


Image

_________________
Sprintless for the first time in 35+ years. :boggle2: ... Still Sprintless.

Engines, Gearboxes, Overdrives etc. rebuilt. PM me.


1997 TVR Chimaera 450


Image


Top
   
PostPosted: Sat Nov 27, 2021 10:36 pm 
Offline
TDC Shropshire Area Organiser

Joined: Sun Aug 21, 2011 5:12 pm
Posts: 7013
Location: Highley, Shropshire
Quote:
I just used copper brake pipe. Technically incorrect but there is enough 'give' in the copper. Never had any problems and they're still on PKN afaik...


Image
Early converted cars are often like this, because that's how Jon did it on his first one! At that time, there simply wasn't access to bespoke flexis we have today.

He's admitted it's not a perfect solution and I agree for 2 reasons, firstly, the caliper is always moving against the fixed pipe retaining bracket in service, only a mm or two in the main, but still moving every time the brakes are applied and released, with an underlying trend outwards as the pads wear. This is a prime candidate for work hardening and failure of the pipe.

Secondly is the necessity to remove the pipe and therefore have to re-bleed at least when taking the caliper off for changing pads or bend it out of the way (which is worse)

With a flexi in place, neither of these potential problems exist. I can't speak for anyone else, but I don't take ANY chances with brakes. OTT? Maybe! But i'd rather be safe than sorry! The way I drive, my first prang will likely be my last!

Steve

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.


Top
   
PostPosted: Sun Nov 28, 2021 9:20 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Thu Nov 09, 2017 7:55 pm
Posts: 436
Location: Maidstone
You can buy all the parts from car builder solutions to make the pipes up yourself. I did exactly that. There are no special tools required, and it’s not too difficult. if you are confident enough to work on your brakes then go for it. If not I’d buy a pair from Steve at that price.


Top
   
PostPosted: Sun Nov 28, 2021 10:05 pm 
Offline
TDC Member

Joined: Mon Dec 12, 2016 9:53 pm
Posts: 1699
Location: Harrow Middlesex
Quote:
You can buy all the parts from car builder solutions to make the pipes up yourself. I did exactly that. There are no special tools required, and it’s not too difficult. if you are confident enough to work on your brakes then go for it. If not I’d buy a pair from Steve at that price.
Just ordered some to modify mine


Top
   
PostPosted: Sun Nov 28, 2021 11:28 pm 
Offline
TDC Shropshire Area Organiser

Joined: Sun Aug 21, 2011 5:12 pm
Posts: 7013
Location: Highley, Shropshire
Quote:
You can buy all the parts from car builder solutions to make the pipes up yourself. I did exactly that. There are no special tools required, and it’s not too difficult. if you are confident enough to work on your brakes then go for it. If not I’d buy a pair from Steve at that price.
I'm not even bothered if you want to copy my design, in fact I think it best if you do. Mine went through 4 development changes to end up how they are, a handed pair with 90 degree angles very close to each of the ends. The angle at the main flexi end is to allow it to fit to the unmodified flexi bracket and the angle at the caliper end is to stop the arc of the hose rubbing on the upper wishbones when the suspension is compressed (this is exagerated further if the car is lowered or on lock - or both) The handedness comes from there being 2x90 degree angles that are not in line or opposed to each other but at 120 degrees apart, 1 to the left on the right side and it's complement on the other side. This so each fits exactly without twisting the hose.

I make little more than £5 on each pair once postage is taken into account, if y'all can do better, you are welcome to try!

Steve

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.


Top
   
PostPosted: Mon Nov 29, 2021 9:20 pm 
Offline
TDC Member

Joined: Sun Nov 17, 2019 1:07 pm
Posts: 36
I can attest to the quality of the carledo set. Thanks again :thumbsup:


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

All times are UTC


Who is online

Users browsing this forum: Amazon [Bot], Bing and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited