Quote:
Quote:
Yes they are.
Trim-Metal are the best, look for brands such as Vandervel, Glacier AE or Clevite. I have some sizes of these on the shelf
New old stock come up from time to time on ebay, or you could chance King brand though often you'll find County brand in King boxes...
Alunn
Thanks, cant see any sizes on the original bearing there VP so think they must be standard size, if you have both big ends and mains tell me know
thanks Dave
Usually oversized bearings are marked as such, some brands also mark standard as such, so it sounds as if your's are standard; if in doubt, measure the crank journal diameters. They should be 2.1260 to 2.1265 inches for the mains and 1.75 to 1.7505 inches for the crankpin.
I have Australian made BapGeon brand bearings for the big ends and Israeli made (better quality old stock) King brand for both in standard size