The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
Vintage Brass electrical ties. How to use them? http://forum.triumphdolomite.co.uk/viewtopic.php?t=34688 |
Page 1 of 1 |
Author: | Sundowner [ Tue Jan 29, 2019 1:01 am ] | ||
Post subject: | Vintage Brass electrical ties. How to use them? | ||
Hi, Having a real strong dislike for sighting modern plastic electrical ties under the hoods (or anywhere) on veteran & vintage cars, recently I bought several of these (8 inches long X 1/4 inch wide) brass ties from the "Restoration Supply Company", and their spiel is.... "Authentic lightweight brass wire tie to correctly “tie stuff” together on vintage vehicles". My question is....What is the 'correct" way to tie them off? The pointy end from the outside through the end slot/hole and then upwards and outwards through the innermost hole? .....seems like one way that'd work, but I just don't know. This is in order to secure some exposed wiring loom on my 1915 speedster and because it'll be clearly visible, I want to get it right. Anybody "in the know"? Thanks & Cheers, Rob
|
Author: | tony g [ Tue Jan 29, 2019 8:32 am ] |
Post subject: | Re: Vintage Brass electrical ties. How to use them? |
I think through the nearest hole first then back through to the furthest hole with a bend so the double bend stops it undoing. Hard to explain lol Tony |
Author: | Sundowner [ Tue Jan 29, 2019 9:08 am ] |
Post subject: | Re: Vintage Brass electrical ties. How to use them? |
Quote:
I think through the nearest hole first then back through to the furthest hole with a bend so the double bend stops it undoing. Hard to explain lol
Sounds logical to me Tony.Tony Good advice from you as usual. Cheers, Rob |
Author: | TrustNo1 [ Tue Jan 29, 2019 6:31 pm ] |
Post subject: | Re: Vintage Brass electrical ties. How to use them? |
They are called Buckle clips through the inner most hole first , pull tight, then through the outer hole and bend back but these are 'too old' for Dolomites why not use the original type or binding tape? |
Author: | Mad Mart [ Tue Jan 29, 2019 6:37 pm ] |
Post subject: | Re: Vintage Brass electrical ties. How to use them? |
Quote:
They are called Buckle clips through the inner most hole first , pull tight, then through the outer hole and bend back but these are 'too old' for Dolomites why not use the original type or binding tape?
Because they're for his Speedster!
|
Author: | TrustNo1 [ Tue Jan 29, 2019 6:41 pm ] |
Post subject: | Re: Vintage Brass electrical ties. How to use them? |
Quote: Quote:
They are called Buckle clips through the inner most hole first , pull tight, then through the outer hole and bend back but these are 'too old' for Dolomites why not use the original type or binding tape?
Because they're for his Speedster!
Oh ok |
Author: | Sundowner [ Tue Jan 29, 2019 7:24 pm ] |
Post subject: | Re: Vintage Brass electrical ties. How to use them? |
Thanks Gents, I appreciate your good advice. Cheers, Rob |
Page 1 of 1 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |