The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Thu Mar 28, 2024 8:13 am

All times are UTC




Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next
Author Message
 Post subject: Engine Support Beam
PostPosted: Fri May 29, 2020 12:22 am 
Offline
TDC Member
User avatar

Joined: Wed Aug 16, 2017 2:06 pm
Posts: 628
Location: Outer Hebrides
Has anyone used an engine support beam, I'm looking to get one and wondering is there one that's more suited to the Dolomite.

Do they all sit in the wing guttering, I'm not so keen on doing that, as it's newly painted.

Image

_________________
Triumph Dolomite Sprint,RNK 957W

Built 26/6/1980 (one of the last built), Auto, Porcelain White - Genuine Mileage 52,820 (warranted).

Only 3 previous owners, (2 within the same family).

Supplied by Lavender Hill Garage Ltd, Enfield, London, by garage owner Jimmy Metcalfe on 30th September 1980 to Geoffery Robinson, Enfield.

Club Membership No: 2017092


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Fri May 29, 2020 9:41 am 
Offline
TDC Member

Joined: Fri Jan 31, 2020 8:18 am
Posts: 26
Location: Perth, Australia
I am curious. I can’t see the point, what use are they? Only time I would want to lift or hold an engine, I would use a hydraulic crane lift. :?:


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Fri May 29, 2020 10:37 am 
Offline
TDC Member
User avatar

Joined: Wed Aug 16, 2017 2:06 pm
Posts: 628
Location: Outer Hebrides
Quote:
I am curious. I can’t see the point, what use are they? Only time I would want to lift or hold an engine, I would use a hydraulic crane lift. :?:
My car's on a lift, so want the full benefit of it, so the beam is the perfect solution.

_________________
Triumph Dolomite Sprint,RNK 957W

Built 26/6/1980 (one of the last built), Auto, Porcelain White - Genuine Mileage 52,820 (warranted).

Only 3 previous owners, (2 within the same family).

Supplied by Lavender Hill Garage Ltd, Enfield, London, by garage owner Jimmy Metcalfe on 30th September 1980 to Geoffery Robinson, Enfield.

Club Membership No: 2017092


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Fri May 29, 2020 10:48 am 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Wed Oct 23, 2013 8:10 pm
Posts: 759
Location: NORTH NOTTS
only way your goner find out if its worth it is too buy one,,,but be warned it could be a cheap toffee one from china....if you got time build one

_________________
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Fri May 29, 2020 11:24 am 
Offline
TDC Member

Joined: Fri Jan 31, 2020 8:18 am
Posts: 26
Location: Perth, Australia
Murdo Yes having a ramp could make it useful. Without one, I would stick with crane as it can it can multi task and leave money left over for parts.


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Fri May 29, 2020 11:29 am 
Offline
TDC Member
User avatar

Joined: Wed Aug 16, 2017 2:06 pm
Posts: 628
Location: Outer Hebrides
Quote:
only way your goner find out if its worth it is too buy one,,,but be warned it could be a cheap toffee one from china....if you got time build one
That's why I'm asking, to see if folk have tried some :lol:

_________________
Triumph Dolomite Sprint,RNK 957W

Built 26/6/1980 (one of the last built), Auto, Porcelain White - Genuine Mileage 52,820 (warranted).

Only 3 previous owners, (2 within the same family).

Supplied by Lavender Hill Garage Ltd, Enfield, London, by garage owner Jimmy Metcalfe on 30th September 1980 to Geoffery Robinson, Enfield.

Club Membership No: 2017092


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Fri May 29, 2020 12:59 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Tue Oct 03, 2006 5:42 pm
Posts: 3937
Location: Forest of Dean
I've used one many times, a Clarke Strong-arm 500kg. This is the closest on Machine Mart now:
Image
The job I got it for was the 20,000 mile bearing changes on my 1500HL but actually it got used a lot more than that. Turned out to be more useful than expected. On mine the rubber feet are a perfect snug fit in the channel around the engine bay though the metal gets very close to the wing. On paint as pristine as yours a 2mm thick shim of rubber in the channel first would lift the metal safely clear. It looks in the above picture like the rubber is now round and broader which might not work so well.

Ah, here it is on the left on fleabay:
Image
The fixed length beam would stick out well past the wings on a Dolomite, telescopic doesn't get bumped into.

_________________
1978 Pageant Sprint - the rustomite, 1972 Spitfire IV - sprintfire project, 1968 Valencia GT6 II - little Blue, 1980 Vermillion 1500HL - resting. 1974 Sienna 1500TC, Mrs Weevils big brown.


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Fri May 29, 2020 2:23 pm 
Offline
TDC Member
User avatar

Joined: Wed Aug 16, 2017 2:06 pm
Posts: 628
Location: Outer Hebrides
Quote:

The job I got it for was the 20,000 mile bearing changes on my 1500HL but actually it got used a lot more than that. Turned out to be more useful than expected. On mine the rubber feet are a perfect snug fit in the channel around the engine bay though the metal gets very close to the wing. On paint as pristine as yours a 2mm thick shim of rubber in the channel first would lift the metal safely clear. It looks in the above picture like the rubber is now round and broader which might not work so well.

Ah, here it is on the left on fleabay:
Image
The fixed length beam would stick out well past the wings on a Dolomite, telescopic doesn't get bumped into.
That's a great help!! :thumbsup:

Which engine lifting lug did you fix it to - the Sprint has one on the back and on the front.

_________________
Triumph Dolomite Sprint,RNK 957W

Built 26/6/1980 (one of the last built), Auto, Porcelain White - Genuine Mileage 52,820 (warranted).

Only 3 previous owners, (2 within the same family).

Supplied by Lavender Hill Garage Ltd, Enfield, London, by garage owner Jimmy Metcalfe on 30th September 1980 to Geoffery Robinson, Enfield.

Club Membership No: 2017092


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Fri May 29, 2020 3:10 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Tue Oct 03, 2006 5:42 pm
Posts: 3937
Location: Forest of Dean
Whichever. I used the front for getting at the sump or steering rack & rear for changing a gearbox mount.

_________________
1978 Pageant Sprint - the rustomite, 1972 Spitfire IV - sprintfire project, 1968 Valencia GT6 II - little Blue, 1980 Vermillion 1500HL - resting. 1974 Sienna 1500TC, Mrs Weevils big brown.


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Fri May 29, 2020 3:11 pm 
Offline
TDC Member
User avatar

Joined: Wed Aug 16, 2017 2:06 pm
Posts: 628
Location: Outer Hebrides
Quote:
Whichever. I used the front for getting at the sump or steering rack & rear for changing a gearbox mount.
:thumbsup: :thumbsup:

_________________
Triumph Dolomite Sprint,RNK 957W

Built 26/6/1980 (one of the last built), Auto, Porcelain White - Genuine Mileage 52,820 (warranted).

Only 3 previous owners, (2 within the same family).

Supplied by Lavender Hill Garage Ltd, Enfield, London, by garage owner Jimmy Metcalfe on 30th September 1980 to Geoffery Robinson, Enfield.

Club Membership No: 2017092


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Fri May 29, 2020 4:00 pm 
Offline
TDC Shropshire Area Organiser

Joined: Sun Aug 21, 2011 5:12 pm
Posts: 7013
Location: Highley, Shropshire
I have one now and have owned a couple of others before. The first one I ever saw (must have been back in the early 80s) was made from a lump of 3"x3" timber with holes drilled in it at strategic points and a lump of studding through it, bent into a hook at the bottom! But it worked! Everything i've had since was just refinement.

They are great when putting clutches in FWD cars!

But all mine have been home made by me or others, purely on cost grounds! If as I do, you live next door to a steel stockholder and can weld, it's a no brainer!

So far, in a long time and much abuse, i've not damaged any paintwork. If you make the gutter feet wide enough it spreads the load sufficiently to avoid problems.

Steve

PS I would advise the fixed lenth bar with adjustable feet, the telescopic might not go narrow enough for classics like the Sprint and is less flexible in use as there is less latitude in the central position. My 2 pennorth from 30 odd years of using them!

_________________
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Fri May 29, 2020 5:15 pm 
Offline
TDC Member
User avatar

Joined: Mon Nov 07, 2011 9:57 am
Posts: 713
Location: Dorset
Quote:
On mine the rubber feet are a perfect snug fit in the channel around the engine bay though the metal gets very close to the wing. On paint as pristine as yours a 2mm thick shim of rubber in the channel first would lift the metal safely clear. It looks in the above picture like the rubber is now round and broader which might not work so well.
I had a similar experience on a cheap ebay knock-off version. very handy when you're messing around with mounts etc. As long as you're careful and don't smack it into things getting it into position it works wonders.

Steve


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Sat Jun 06, 2020 7:00 am 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Tue Oct 03, 2006 7:38 pm
Posts: 2565
Location: Birmingham
I have the same one as Tinweevil, its a great piece of kit and can be used for a whole host of jobs.

_________________
Vindicator Sprint, Honda Fireblade RRX 919cc, re-powered by AB Performance. Quick.


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Thu Jun 18, 2020 7:58 am 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Tue Oct 03, 2006 5:52 pm
Posts: 7566
Location: Halifax, West Yorkshire
When I had the local garage replace a section of the offside front wing on my 1850 which included the front mounting point for the front subframe, an engine support beam was used for them to be able to drop the front subframe leaving the engine/transmission in situ. The job was done on a 2 post ramp so it was an essential piece of kit.

_________________
Toledo Man

West Yorkshire Area Organiser & forum moderator
Meetings take place on the first Wednesday of the month at 8.00pm at The Old Brickworks, Wakefield Road, Drighlington, Bradford, BD11 1EA

1972 Dolomite 1850 auto (NYE 751L - Now for sale)
2003 Volvo XC90 D5 SE (PX53 OVZ - The daily driver)
2009 Mercedes-Benz W204 C200 CDI Sport (BJ58 NCV - The 2nd car)
1991 Toyota Celica GT (J481 ONB - another project car)
Former stable of SAY 414M (1974 Toledo), GRH 244D (1966 1300fwd), CDB 324L (1973 1500fwd), GGN 573J (1971 1500fwd), DCP 625S (1977 Dolomite 1300) & LCG 367N (1975 Dolomite Sprint) plus 5 Acclaims and that's just the Triumphs!

Check my blog at http://triumphtoledo.blogspot.com
My YouTube Channel with a bit of Dolomite content.

"There is only one way to avoid criticsm: Do nothing, say nothing and BE nothing." Aristotle


Top
   
 Post subject: Re: Engine Support Beam
PostPosted: Thu Jun 18, 2020 8:30 am 
Offline
TDC Member
User avatar

Joined: Wed Aug 16, 2017 2:06 pm
Posts: 628
Location: Outer Hebrides
Quote:
When I had the local garage replace a section of the offside front wing on my 1850 which included the front mounting point for the front subframe, an engine support beam was used for them to be able to drop the front subframe leaving the engine/transmission in situ. The job was done on a 2 post ramp so it was an essential piece of kit.
I'm just waiting for it to arrive.

I did received one, but it was the wrong one and wouldn't work. The one I ordered is NA now which they claim they never knew about, so I've ordered a Sealey instead, would should work according to all the measurements.

_________________
Triumph Dolomite Sprint,RNK 957W

Built 26/6/1980 (one of the last built), Auto, Porcelain White - Genuine Mileage 52,820 (warranted).

Only 3 previous owners, (2 within the same family).

Supplied by Lavender Hill Garage Ltd, Enfield, London, by garage owner Jimmy Metcalfe on 30th September 1980 to Geoffery Robinson, Enfield.

Club Membership No: 2017092


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited