The Triumph Dolomite Club - Discussion Forum
http://forum.triumphdolomite.co.uk/

Sprint Engine Mounts
http://forum.triumphdolomite.co.uk/viewtopic.php?t=35982
Page 1 of 2

Author:  RSi [ Thu Jul 02, 2020 10:16 am ]
Post subject:  Sprint Engine Mounts

I've just been ordering some bits from Chris Witor, and he says the Sprint engine mounts should be available from next week.

Author:  Bish [ Thu Jul 02, 2020 8:19 pm ]
Post subject:  Re: Sprint Engine Mounts

I’ve been keeping an eye on the website myself, and emailed Chris a couple of weeks back. At that point they were advertised at £36, now they are £40 according to the website. I’m taking it that’s each? So with the vat and postage £100 ish for the pair, which is fair enough if they are fit and forget items. Do you know whether they are a standard spec, or harder, Shore ratting, I forgot to ask?!

Author:  RSi [ Thu Jul 02, 2020 9:18 pm ]
Post subject:  Re: Sprint Engine Mounts

Quote:
I’ve been keeping an eye on the website myself, and emailed Chris a couple of weeks back. At that point they were advertised at £36, now they are £40 according to the website. I’m taking it that’s each? So with the vat and postage £100 ish for the pair, which is fair enough if they are fit and forget items. Do you know whether they are a standard spec, or harder, Shore ratting, I forgot to ask?!
I think it's a fair price too, it's £40 for one. They're superflex.

Author:  SprintMWU773V [ Fri Jul 03, 2020 10:27 am ]
Post subject:  Re: Sprint Engine Mounts

Excellent. I will definitely order some.

Author:  Matt Cotton [ Fri Jul 03, 2020 10:53 am ]
Post subject:  Re: Sprint Engine Mounts

1500 and 1850 engine mounts are also in development with Chris. Richard Old has been working with him on these and they will have the correct shore rating as mentioned.

Encouraging, especially if they are 'fit and forget'. The bushes Chris sells are always well regarded, so I'm sure they will be a good investment.

Author:  soe8m [ Sat Jul 04, 2020 12:22 pm ]
Post subject:  Re: Sprint Engine Mounts

I hope they will last but I will let others try first. These enginemounts are designed to have an engine to sit on and not to hang on. Some engines hang on mounts but these have a very different design. These new ones can be superflex but are still hanging. They have to be very sturdy to stay in shape and carry the engine. Maybe too sturdy making things break and tear. The original design is not correct and I think superflex will not change that.

I have used Big Healey engine mounts in the past on the RH side as these are designed for hanging. On one Sprint I did modify the brackets to have both original mounts sitting 45 degrees and one still to fit subframe I have a tubular mount with round bushes on the RH side.

Hope it will work out but in this case it's not the rubber material that is to blame but the design using a carrying mount as a hanging one.

Jeroen

Author:  RSi [ Sat Jul 04, 2020 3:06 pm ]
Post subject:  Re: Sprint Engine Mounts

Quote:
I hope they will last but I will let others try first. These enginemounts are designed to have an engine to sit on and not to hang on. Some engines hang on mounts but these have a very different design. These new ones can be superflex but are still hanging. They have to be very sturdy to stay in shape and carry the engine. Maybe too sturdy making things break and tear. The original design is not correct and I think superflex will not change that.

Hope it will work out but in this case it's not the rubber material that is to blame but the design using a carrying mount as a hanging one.

Jeroen
I wasn't aware they were a different design. I thought they mirrored the original ones, but just used superflex.

Is the OS one not a hanging mount.

Author:  soe8m [ Sat Jul 04, 2020 3:56 pm ]
Post subject:  Re: Sprint Engine Mounts

LH side is sitting and the RH side is hanging. Both are the same mounts LH and RH but the design and shape of the original mounts are for sitting. That's why the original setup isn't quite a succes and the new ones being superflex only the material has changed.

Jeroen

Author:  Carledo [ Sun Jul 12, 2020 1:04 am ]
Post subject:  Re: Sprint Engine Mounts

Quote:
LH side is sitting and the RH side is hanging. Both are the same mounts LH and RH but the design and shape of the original mounts are for sitting. That's why the original setup isn't quite a succes and the new ones being superflex only the material has changed.

Jeroen


I keep saying this but no one listens! Maybe with your rep, you'll have more luck!

Steve

Author:  RSi [ Fri Jul 17, 2020 9:06 pm ]
Post subject:  Re: Sprint Engine Mounts

Here's the mounts, against my original NS mount, you can see how close a match they are. The mounts look identical, but I won't know what they're like until sometime next year.

The last photo is with my original mounts, and you can see how the OS one has stretched in comparison to the NS one.

Image

Image

Image

Author:  Bish [ Fri Jul 17, 2020 9:30 pm ]
Post subject:  Re: Sprint Engine Mounts

They deffinately look the part Murdo, and they’ve got to be better than the rubbish repro ones sold by most!

I think Im going to wait until someone else fits some, and road tests them before I splash out though. As others have said the original design is wrong, but my guess is that these super flex mounts will surely be the best answer that’s available off the shelf.

Author:  SprintMWU773V [ Tue Aug 11, 2020 10:57 am ]
Post subject:  Re: Sprint Engine Mounts

I'd never noticed they were offset before now. Which way do they go round?

Author:  TZbaz [ Tue Aug 11, 2020 10:23 pm ]
Post subject:  Re: Sprint Engine Mounts

Am in need of a pair of engine mounts and also the gearbox mount , Who's best to deal with please ?

Chris

Author:  RSi [ Wed Aug 12, 2020 9:01 am ]
Post subject:  Re: Sprint Engine Mounts

Quote:
Am in need of a pair of engine mounts and also the gearbox mount , Who's best to deal with please ?

Chris
What model do you have Chris?

Chris Witor is making the mounts - these are the ones I bought and on this post.

Author:  TZbaz [ Wed Aug 12, 2020 11:52 am ]
Post subject:  Re: Sprint Engine Mounts

Sorry should have said for a Sprint . Just going through the new car and finding little bits that need attention . Most of the rubber bushes are perished so will need replacing . I wanted to get the car mobile for the rest of this year and then start the work over winter, but some jobs need doing now ! Engine mounts , gearbox mount, brake servo is u/s etc etc .

Chris.

Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/