The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Thu Mar 28, 2024 11:44 pm

All times are UTC




Post new topic  Reply to topic  [ 238 posts ]  Go to page Previous 13 4 5 6 716 Next
Author Message
PostPosted: Fri Dec 10, 2010 9:10 am 
Glad you liked the 1300 Howard, yes, it will all be sorted at some point soon.

Did you get the vinyl paint from the shop? Forgot to ask.


Top
   
PostPosted: Fri Dec 10, 2010 10:45 am 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Tue Oct 03, 2006 9:45 pm
Posts: 11179
Location: Middlesex
Funny about the under reading speedo. My spit one started to under read as it got older. It now under reads about 10%...so I use the tacho when I need to. It muts be a spring thing cos it still counts the miles okay...

Do you have the 3.89 diff (original) still or did it get the 3.63 that goes with the 1500 engine in a spit. The box will have the speedo drive gear that went with the rear axle ratio it was made with. Being a 3 rail would make no difference. Its easy to change the drive gear if you need to.

The single rail gearchange works better with a Spit and its short lever. The 3 rail tends to need a remote change bush kit every 5 minutes and still flops about even when new.

Jonners

_________________
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.


Top
   
PostPosted: Fri Jan 07, 2011 6:56 pm 
Offline
TDC Member
User avatar

Joined: Fri Jan 11, 2008 9:02 am
Posts: 3401
Location: London
The Spitfire has been standing unused for over two weeks, but she fired right up on the first turn of they key. Excellent!

Hopefully if the rain holds up I'll be able to get the passenger floor treated and painted. Wiper motor is still dead.

_________________
1978 Triumph Dolomite Sprint (project thread)
1966 Volkswagen 1300 (project thread)
1962 Austin Mini (project)
1962 MGA 1600 Mark II
1965 Mobylette SP50 (project)
2001 Rover 75 2.5-litre V6


Top
   
PostPosted: Fri Jan 07, 2011 7:00 pm 
Offline
TDC Member
User avatar

Joined: Fri Jan 11, 2008 9:02 am
Posts: 3401
Location: London
Quote:
Funny about the under reading speedo. My spit one started to under read as it got older. It now under reads about 10%...so I use the tacho when I need to. It muts be a spring thing cos it still counts the miles okay...

Do you have the 3.89 diff (original) still or did it get the 3.63 that goes with the 1500 engine in a spit. The box will have the speedo drive gear that went with the rear axle ratio it was made with. Being a 3 rail would make no difference. Its easy to change the drive gear if you need to.

The single rail gearchange works better with a Spit and its short lever. The 3 rail tends to need a remote change bush kit every 5 minutes and still flops about even when new.

Jonners
I have another spare MKIV speedo that I can test. I have a 3-rail 'box out of a Toledo if the ratio gear is what i need?

No idea on the rear diff, will try to get the number off it soon!

Also picked up an exhaust, secondhand but in excellent order. Manifold, downpipe and centre pipe - £1.20 :D

_________________
1978 Triumph Dolomite Sprint (project thread)
1966 Volkswagen 1300 (project thread)
1962 Austin Mini (project)
1962 MGA 1600 Mark II
1965 Mobylette SP50 (project)
2001 Rover 75 2.5-litre V6


Top
   
PostPosted: Fri Jan 07, 2011 7:57 pm 
£1.20?? Rip off! :lol: :lol: :lol: :lol:


Top
   
PostPosted: Mon Jan 10, 2011 10:19 am 
Offline
Future Club member hopefully!
Future Club member hopefully!

Joined: Tue Oct 03, 2006 9:45 pm
Posts: 11179
Location: Middlesex
A tolly would be 4.11 so lower than the Spit, which would make the speedo over read with a 3.89 or 3.63

Given that yours under reads, that could be what you want....:-)

A GPS is a quick way to callibrate it.

Jonners

_________________
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.


Top
   
PostPosted: Mon Jan 10, 2011 11:14 am 
Offline
TDC Member
User avatar

Joined: Fri Jan 11, 2008 9:02 am
Posts: 3401
Location: London
Actually, the engine number is an early 1500 Midget, so the gearbox is possibly out of one too..

_________________
1978 Triumph Dolomite Sprint (project thread)
1966 Volkswagen 1300 (project thread)
1962 Austin Mini (project)
1962 MGA 1600 Mark II
1965 Mobylette SP50 (project)
2001 Rover 75 2.5-litre V6


Top
   
PostPosted: Thu Jan 27, 2011 3:53 pm 
Offline
TDC Member
User avatar

Joined: Fri Jan 11, 2008 9:02 am
Posts: 3401
Location: London
Not much progress lately - it's been far too cold!

I did receive a tin of POR-15 through the post this morning. I've been eager to try this stuff for a while now, as it always seems to be highly regarded on the VW forums.

I wire-brushed the floor, then gave it a liberal coating. It paints on REALLY well, I only used about 10% of the can to do my whole passenger-side floor! I'll give it a couple of days to dry, then top-coat it in red Hammerite. Then at least I can put half the interior back in properly :)

Image

Image

_________________
1978 Triumph Dolomite Sprint (project thread)
1966 Volkswagen 1300 (project thread)
1962 Austin Mini (project)
1962 MGA 1600 Mark II
1965 Mobylette SP50 (project)
2001 Rover 75 2.5-litre V6


Top
   
PostPosted: Fri Jan 28, 2011 5:30 pm 
Get any on your hands Howard? You slopped on that sill. Messy sod! :lol: :lol: :lol: :lol: :lol: :lol:


Top
   
PostPosted: Fri Jan 28, 2011 6:03 pm 
Offline
TDC Member
User avatar

Joined: Fri Jan 11, 2008 9:02 am
Posts: 3401
Location: London
Yes I wear gloves and somehow it managed to get inside, pesky stuff :lol:

I didn't realise that splodge on the sill until it was too late and now it's rock solid :(

Hammerited the floor today and it looks shite. But I do remember that the bit around the gearbox looked crap until I put on the second coat.

I used about 10% of a 250ml can of POR-15 on the floor, whereas I used a whole 250ml of Hammerite Smooth on the floor.. and it needs another coat :shock: So I'm now convinced POR-15 is worth the cost.

I'm undecided if I should continue using the red Hammerite, as I'm only doing it red for continuity.. It'll be covered up anyway! I wish they did red POR-15 :lol:

_________________
1978 Triumph Dolomite Sprint (project thread)
1966 Volkswagen 1300 (project thread)
1962 Austin Mini (project)
1962 MGA 1600 Mark II
1965 Mobylette SP50 (project)
2001 Rover 75 2.5-litre V6


Top
   
PostPosted: Sun Jan 30, 2011 7:33 pm 
Offline
TDC Member
User avatar

Joined: Fri Jan 11, 2008 9:02 am
Posts: 3401
Location: London
Went out to the car today only to find it has been attacked by some low-life :fuming: :fuming: :fuming:

Passenger-side wing mirror has been kicked off and smashed, and two large sand bag has been thrown from some distance on to the roof.. my hard top now has two lovely big dents in the top, plus the paint has cracked and come off in places. Also a big dollop of gob on the window. Livid is not the word :fuming:

The sand bags were from some road works from a year ago, but some bits got left behind and not collected for over a year.

Managed to re-attach the two parts of the wing mirror and bolt it back on the car, but the glass is broken.. Hard top now looks s##t :snivel:

On the positive side, at least only a mirror and hard top got damaged.. both bolt-on, replaceable parts.. :roll:

Image

Image

Image

Image

_________________
1978 Triumph Dolomite Sprint (project thread)
1966 Volkswagen 1300 (project thread)
1962 Austin Mini (project)
1962 MGA 1600 Mark II
1965 Mobylette SP50 (project)
2001 Rover 75 2.5-litre V6


Top
   
PostPosted: Sun Jan 30, 2011 7:44 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Sat Oct 24, 2009 10:48 am
Posts: 997
Location: Norwich
That's Awfull Howard.... :(
Why do people do such things
If you ever catch up with em Id cut off thier Gentleman Vegitables with a rusty penknife. :hotcross:

On a plus side at least the damage isn't too bad

_________________
Round The U Bend Looking for my Camera


Top
   
PostPosted: Sun Jan 30, 2011 10:06 pm 
Stupid, pointless and mindless behaviour.

Howard, will the dents push out?


Top
   
PostPosted: Sun Jan 30, 2011 10:16 pm 
Offline
TDC Member
User avatar

Joined: Fri Jan 11, 2008 9:02 am
Posts: 3401
Location: London
Maybe, but they're right on the edge of that pressing. You'd have to remove the headlining, which I'd rather not as it's perfect and they never go back in as well!!

_________________
1978 Triumph Dolomite Sprint (project thread)
1966 Volkswagen 1300 (project thread)
1962 Austin Mini (project)
1962 MGA 1600 Mark II
1965 Mobylette SP50 (project)
2001 Rover 75 2.5-litre V6


Top
   
PostPosted: Sun Jan 30, 2011 11:01 pm 
:evil: What absolute morons! Where's the satisfaction in doing things like that for Goodness' sake? I could understand, though obviously not condone, such activities if there were any pleasure to be had by doing these things.

It might be worth trying the hair dryer and freezer spray technique on the roof as it often works, even on dents that are quite tight against edges, there's nothing to lose apart from the cost of the aerosol, and an inverted can of compressed air works just as well as actual freezer spray.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 238 posts ]  Go to page Previous 13 4 5 6 716 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 31 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited