windscreens
windscreens
Hi all. I am about to change front and rear windscreen rubbers, the rubbers are already fitted to the glass. My question is, can I put some Vaseline or such like on the rubbers to aid installation in framework, Regards, Myles.
Re: windscreens
Yes you can, but if you have some clear waxoil this will work to seal it too 
Tony

Tony
Membership 2014047
- SprintMWU773V
- TDC Staffs Area Organiser
- Posts: 5429
- Joined: Wed Oct 18, 2006 2:08 pm
- Location: The Old Asylum
Re: windscreens
Personally I would use red rubber grease as it won't damage the rubber.
Mark
1961 Chevrolet Corvair Greenbrier Sportswagon
1980 Dolomite Sprint project using brand new shell
2009 Mazda MX5 2.0 Sport
2018 Infiniti Q30
1961 Chevrolet Corvair Greenbrier Sportswagon
1980 Dolomite Sprint project using brand new shell
2009 Mazda MX5 2.0 Sport
2018 Infiniti Q30
- Toledo Man
- Guest contributor
- Posts: 7542
- Joined: Tue Oct 03, 2006 5:52 pm
- Location: Halifax, West Yorkshire
- Contact:
Re: windscreens
We had this discussion not so long ago and the general consensus was to use sealant when fitting the glass because this is what the workshop manuals recommended. I fitted my windscreen without any sealant and I must've got lucky because it has remained leak free ever since. I bought my trim strip from Rarebits (you Herald owners and Club Triumph members will know Bill Davies who owns Rarebits). Mark, will the rubber grease help to seal the screen? It sounds like a good idea if it does.
Toledo Man
West Yorkshire Area Organiser
Meetings take place on the first Wednesday of the month at 8.00pm at The Railway, 1 Birstall Lane, Drighlington, Bradford, BD11 1JJ
2003 Volvo XC90 D5 SE (PX53 OVZ - The daily driver)
2009 Mercedes-Benz W204 C200 CDI Sport (BJ58 NCV - The 2nd car)
1991 Toyota Celica GT (J481 ONB - a project car)
Former stable of SAY 414M (1974 Toledo), GRH 244D (1966 1300fwd), CDB 324L (1973 1500fwd), GGN 573J (1971 1500fwd), DCP 625S (1977 Dolomite 1300) & LCG 367N (1975 Dolomite Sprint), NYE 751L (1972 Dolomite 1850 auto) plus 5 Acclaims and that's just the Triumphs!
Check my blog at http://triumphtoledo.blogspot.com
My YouTube Channel with a bit of Dolomite content.
"There is only one way to avoid criticsm: Do nothing, say nothing and BE nothing." Aristotle
West Yorkshire Area Organiser
Meetings take place on the first Wednesday of the month at 8.00pm at The Railway, 1 Birstall Lane, Drighlington, Bradford, BD11 1JJ
2003 Volvo XC90 D5 SE (PX53 OVZ - The daily driver)
2009 Mercedes-Benz W204 C200 CDI Sport (BJ58 NCV - The 2nd car)
1991 Toyota Celica GT (J481 ONB - a project car)
Former stable of SAY 414M (1974 Toledo), GRH 244D (1966 1300fwd), CDB 324L (1973 1500fwd), GGN 573J (1971 1500fwd), DCP 625S (1977 Dolomite 1300) & LCG 367N (1975 Dolomite Sprint), NYE 751L (1972 Dolomite 1850 auto) plus 5 Acclaims and that's just the Triumphs!
Check my blog at http://triumphtoledo.blogspot.com
My YouTube Channel with a bit of Dolomite content.
"There is only one way to avoid criticsm: Do nothing, say nothing and BE nothing." Aristotle
- xvivalve
- TDC West Mids Area Organiser
- Posts: 13586
- Joined: Thu Sep 28, 2006 1:13 pm
- Location: Over here...can't you see me?
Re: windscreens
Vaseline will act as a solvent to the rubber and must be avoided. Also avoid washing up liquid due to high salt content.
-
- TDC Member
- Posts: 2338
- Joined: Sun Mar 16, 2008 2:52 pm
Re: windscreens
When I did my rear screen recently I fitted it initially without any sealant as I didn't want to risk getting it on the headlining. I then used one of these caulking guns with a fine nozzle to inject sealant from the outside under both lips. I then refitted the plastic chrome trim.
Re: windscreens
Thank you for your advice, both screens are in.will use a caulkinggun to apply sealant and then fit trim
thanks to you again.Myles.
thanks to you again.Myles.