Bonnet bulkhead weather seal

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Post Reply
Message
Author
simonhorton
TDC Member
Posts: 462
Joined: Thu Oct 12, 2006 6:40 pm

Bonnet bulkhead weather seal

#1 Post by simonhorton »

Hi All,
Where's the best place to buy a seal from
Photo enclosed

Thank you
Attachments
image.jpeg
image.jpeg (280.39 KiB) Viewed 1097 times
Top
User avatar
HQentity
Guest contributor
Guest contributor
Posts: 309
Joined: Mon Jan 05, 2015 12:42 pm
Location: Ashington, West Sussex

Re: Bonnet bulkhead weather seal

#2 Post by HQentity »

Hiya Simon

I recently bought one from rimmers, it's good quality and they gave a bit extra length. Only thing I would say is the bonnet has raised a few mm on one side, but I'm convinced that was my haphazard fitting rather than the product.
HQentity (Kyle)

1975 TRIUMPH DOLOMITE 1850 in Honeysuckle (Nina) 2015-2020
Image

"The harder the conflict, the more glorious the Triumph." - Thomas Paine
Top
User avatar
bazyerma
TDC Member
Posts: 293
Joined: Wed Nov 25, 2015 5:23 pm
Location: Aberdeen

Re: Bonnet bulkhead weather seal

#3 Post by bazyerma »

Rimmers have it below, its not a formed shape

http://www.rimmerbros.co.uk/Item--i-717594

Regards

Barry
Aberdeen

1975 Triumph 1500 TC various shades of blue
Top
User avatar
Galileo
TDC Member
Posts: 1297
Joined: Mon Aug 10, 2015 8:20 pm
Location: Shetland / here & there

Re: Bonnet bulkhead weather seal

#4 Post by Galileo »

Take a look at madmarts last few posts on Project XJX (Pimento Sprint) and he mentions Phoenix Trim.
Current fleet: '75 Sprint, '73 1850, Daihatsu Fourtrak, Honda CG125, Yamaha Fazer 600, Shetland 570 (yes it's a boat!)

Past fleet: Triumph 2000, Lancia Beta Coupe, BL Mini Clubman, Austin Metro, Vauxhall Cavalier MK1 & MK2, Renault 18 D, Rover 216 GSI, Honda Accord (most expensive car purchase, hated, made out of magnetic metal as only car I've ever been crashed into...4 times), BMW 318, Golf GTi MK3 16v x 3
Top
User avatar
shaunroche
TDC Member
Posts: 1054
Joined: Sun Apr 06, 2014 10:49 pm
Location: Northwich

Re: Bonnet bulkhead weather seal

#5 Post by shaunroche »

Would you believe I've just ordered one of these on the advice of MadMart from http://www.phoenixtrim.co.uk - it's part number SRS 116 and is £13 for 3m......

SRS 116 x £4.20 per metre x 3 metres = £12.60
P&P 1st class = £5.90 or 2nd class = £5.40

kaye@phoenixtrim.co.uk
Come and see some pretty shoddy, slow driving of a really well prepared competition Sprint here!

http://www.youtube.com/@theunknownworrier

Club Triumph Round Britain Reliability Run 2025 Fund raising page:

https://wonderful.org/fundraisers/n8AYV ... derful.org
Top
Post Reply

Return to “Dolomite-related [Start here!]”