The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Thu Mar 28, 2024 1:37 pm

All times are UTC




Post new topic  Reply to topic  [ 28 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Tue Jun 04, 2019 9:24 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Sat Jun 02, 2018 10:38 am
Posts: 80
Hi folks,

I have what’s left of a ‘78 Sprint sitting on my drive, bought by me for spares after a 10 year spell of silently “Rusting in Peace / awaiting restoration” on someone else's drive. Long story short: I’ve decided to save rather than break (I’ll never be rich...), and have managed to get the engine to run. It starts real quick and runs OK-ish, considering a lack of tuning ...all apart from a horrible loud ticking noise :shock: :

Starting:
https://youtu.be/NZmY8cKfGrI

Running:
https://youtu.be/HQ-dztbOJiQ

Exhaust:
https://youtu.be/Kvh3yHjnnK0

On my 1850’s resto thread, some of you guys have mentioned valve clearances, sticking valves, chain tensioners, blocked oilways and slipped shims on valves. All good pointers (thank you!), and plenty for me to check out, but I’m posting here just in case there’s anything else it could be ready for when I next attack the engine, and... do you think it’s safe to drive the car the short distance in / out of my garage, or will this cause further damage (if not already done so)? Will sticking valves damage the head or piston assembly? I’m guessing the engine (not original) is from around ‘74 from the block number (VA8xxxHE), if this makes any difference?

Consider me a noob on these engines please (very much the truth... :oops: )

Cheers! Mike.

_________________
Bradman.

Current classic cars: 1974 Triumph Dolomite (Honey), 1978 Triumph Dolomite Sprint (Holly), 1974 Triumph Spitfire 1500 (Pepper)
Current modern cars: 2010 Mini One (Rusty), 2019 BMW i3 (Treehugger)
Past cars: 2003 BMW Z4 roadster 3.0 (Marty), 1972 Triumph Spitfire IV with 2.0 I6 (Polly), 1972 Ford Escort 1100L with RS2000 running gear (Nora Batty)


Top
   
PostPosted: Wed Jun 05, 2019 7:44 am 
Offline
TDC Member
User avatar

Joined: Sun Sep 08, 2013 3:35 pm
Posts: 1735
Location: St Annes on Sea, Lancs.
You might add this to the list of things to check:
I had a Sprint engine where one of the two screws holding the chain wheel on the front end of the cam had fallen out. It made a similar noise, that wasn't that obviously just at the front, till the second one sheared off, and the cam stopped. After replacing the bolts, etc., it had reasonably compression on all cylinders, and ran well enough. But I was worried.

Graham

_________________
The 16v Slant 4 engine is more fun than the 3.5 V8, because you mostly drive it on the upslope of the torque curve.

Factory 1977 TR7 Sprint FHC VVC 697S (Now all of, but still needs putting together)
B&Y 73 Dolomite Sprint UVB 274M (kids!)
1970 Maroon 13/60 Herald Convertable (wife's fun car).


Top
   
PostPosted: Wed Jun 05, 2019 8:56 am 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Tue Oct 03, 2006 7:10 pm
Posts: 1926
Location: Holland on sea
Sound like the timing chain to me, best whip off the cam cover and take a look at it, what dampers are fitted to those carbs :?: , they don't look like the originals :)


Top
   
PostPosted: Wed Jun 05, 2019 1:50 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Sat Jun 02, 2018 10:38 am
Posts: 80
Quote:
You might add this to the list of things to check:
I had a Sprint engine where one of the two screws holding the chain wheel on the front end of the cam had fallen out. It made a similar noise, that wasn't that obviously just at the front, till the second one sheared off, and the cam stopped. After replacing the bolts, etc., it had reasonably compression on all cylinders, and ran well enough. But I was worried.

Graham
Thanks for the tip, Graham! I’ll be checking those, too then... Cheers, Mike.

_________________
Bradman.

Current classic cars: 1974 Triumph Dolomite (Honey), 1978 Triumph Dolomite Sprint (Holly), 1974 Triumph Spitfire 1500 (Pepper)
Current modern cars: 2010 Mini One (Rusty), 2019 BMW i3 (Treehugger)
Past cars: 2003 BMW Z4 roadster 3.0 (Marty), 1972 Triumph Spitfire IV with 2.0 I6 (Polly), 1972 Ford Escort 1100L with RS2000 running gear (Nora Batty)


Top
   
PostPosted: Wed Jun 05, 2019 3:00 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Sat Jun 02, 2018 10:38 am
Posts: 80
Quote:
Sound like the timing chain to me, best whip off the cam cover and take a look at it, what dampers are fitted to those carbs :?: , they don't look like the originals :)
Righto, I’ll do that!

I do like your attention to detail :lol: I’ve no idea where these dampers came from :shock:. The ones on my other Sprint engine (and my 1850) are the normal non-dustless vented cap type (like flat discs on the top with a small breather hole), but these look like dampers off a “dustless” or vented body type (unsurprisingly, with such knowledge of damper types, I don’t get invited to many parties :lol: ). Looks like I need to check the carbs are actually HS6’s, and that there is 1 (not 0 or 2) vent hole somewhere in the body or damper cap before ordering up any rebuild kits :roll:

Cheers!

Mike.

_________________
Bradman.

Current classic cars: 1974 Triumph Dolomite (Honey), 1978 Triumph Dolomite Sprint (Holly), 1974 Triumph Spitfire 1500 (Pepper)
Current modern cars: 2010 Mini One (Rusty), 2019 BMW i3 (Treehugger)
Past cars: 2003 BMW Z4 roadster 3.0 (Marty), 1972 Triumph Spitfire IV with 2.0 I6 (Polly), 1972 Ford Escort 1100L with RS2000 running gear (Nora Batty)


Top
   
PostPosted: Wed Jun 05, 2019 7:37 pm 
Offline
TDC Member
User avatar

Joined: Mon Aug 10, 2015 8:20 pm
Posts: 1293
Location: Shetland / here & there
Sounds :wary2: like two noises going on there, the light tapping sound might be nothing to worry about, 3 years ago I worried about it, 20 thousand miles later it sounds no different... https://drive.google.com/file/d/0B6QR7c ... pMZmM/view

_________________
Current fleet: '75 Sprint, '73 1850, Daihatsu Fourtrak, Honda CG125, Yamaha Fazer 600, Shetland 570 (yes it's a boat!)

Past fleet: Triumph 2000, Lancia Beta Coupe, BL Mini Clubman, Austin Metro, Vauxhall Cavalier MK1 & MK2, Renault 18 D, Rover 216 GSI, Honda Accord (most expensive car purchase, hated, made out of magnetic metal as only car I've ever been crashed into...4 times), BMW 318, Golf GTi MK3 16v x 3


Top
   
PostPosted: Wed Jun 05, 2019 7:59 pm 
Offline
TDC Member
User avatar

Joined: Sun Sep 08, 2013 3:35 pm
Posts: 1735
Location: St Annes on Sea, Lancs.
Quote:
what dampers are fitted to those carbs :?: , they don't look like the originals :)
Look like ones off HIFs not HSs.

Graham

_________________
The 16v Slant 4 engine is more fun than the 3.5 V8, because you mostly drive it on the upslope of the torque curve.

Factory 1977 TR7 Sprint FHC VVC 697S (Now all of, but still needs putting together)
B&Y 73 Dolomite Sprint UVB 274M (kids!)
1970 Maroon 13/60 Herald Convertable (wife's fun car).


Top
   
PostPosted: Wed Jun 05, 2019 9:31 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Sat Jun 02, 2018 10:38 am
Posts: 80
Quote:
Sounds :wary2: like two noises going on there, the light tapping sound might be nothing to worry about, 3 years ago I worried about it, 20 thousand miles later it sounds no different... https://drive.google.com/file/d/0B6QR7c ... pMZmM/view
Right, I see what you mean! I can hear the lighter tapping amongst the heavy one now you mention it. I’ll worry about that next :). Cheers, Mike.

_________________
Bradman.

Current classic cars: 1974 Triumph Dolomite (Honey), 1978 Triumph Dolomite Sprint (Holly), 1974 Triumph Spitfire 1500 (Pepper)
Current modern cars: 2010 Mini One (Rusty), 2019 BMW i3 (Treehugger)
Past cars: 2003 BMW Z4 roadster 3.0 (Marty), 1972 Triumph Spitfire IV with 2.0 I6 (Polly), 1972 Ford Escort 1100L with RS2000 running gear (Nora Batty)


Top
   
PostPosted: Wed Jun 05, 2019 9:45 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Sat Jun 02, 2018 10:38 am
Posts: 80
Quote:
Quote:
what dampers are fitted to those carbs :?: , they don't look like the originals :)
Look like ones off HIFs not HSs.

Graham
I’ve just had to google what that meant :shock: :lol:
It looks like my carbs are HSs though, from the float chamber being at the side rather than underneath. They’ve had the waxstats replaced with a non-waxstat conversion by a PO, so perhaps they bought new (wrong) dampers at the same time. They are surprisingly expensive I’ve just discovered :shock:. I may just drill a small hole instead... When I’ve sorted the tapping :snivel: Cheers, Mike.

_________________
Bradman.

Current classic cars: 1974 Triumph Dolomite (Honey), 1978 Triumph Dolomite Sprint (Holly), 1974 Triumph Spitfire 1500 (Pepper)
Current modern cars: 2010 Mini One (Rusty), 2019 BMW i3 (Treehugger)
Past cars: 2003 BMW Z4 roadster 3.0 (Marty), 1972 Triumph Spitfire IV with 2.0 I6 (Polly), 1972 Ford Escort 1100L with RS2000 running gear (Nora Batty)


Top
   
PostPosted: Wed Jun 05, 2019 10:26 pm 
Offline
TDC Notts,Derby & Leics Area Organiser
User avatar

Joined: Sat Jun 14, 2008 11:15 pm
Posts: 233
Hopefully it's not this,but a jackshaft which has worn the hole at the front of the block in which it runs can be noisy. Usually accompanied by a drop in oil pressure.
Probably not that but worth feeling for movement if you take the timing cover off.

James


Top
   
PostPosted: Wed Jun 05, 2019 10:48 pm 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Sat Jun 02, 2018 10:38 am
Posts: 80
Quote:
Hopefully it's not this,but a jackshaft which has worn the hole at the front of the block in which it runs can be noisy. Usually accompanied by a drop in oil pressure.
Probably not that but worth feeling for movement if you take the timing cover off.

James
:shock: Oo-er... I hope it’s not that too, that’s a dead block if it’s worn out there, I imagine? Another one for my check list... Cheers! Mike.

_________________
Bradman.

Current classic cars: 1974 Triumph Dolomite (Honey), 1978 Triumph Dolomite Sprint (Holly), 1974 Triumph Spitfire 1500 (Pepper)
Current modern cars: 2010 Mini One (Rusty), 2019 BMW i3 (Treehugger)
Past cars: 2003 BMW Z4 roadster 3.0 (Marty), 1972 Triumph Spitfire IV with 2.0 I6 (Polly), 1972 Ford Escort 1100L with RS2000 running gear (Nora Batty)


Top
   
PostPosted: Wed Jun 05, 2019 11:33 pm 
Offline
TDC Notts,Derby & Leics Area Organiser
User avatar

Joined: Sat Jun 14, 2008 11:15 pm
Posts: 233
A decent machine shop can machine the block and fit a bearing-as it should have been originally. Not cheap though.
I have a block with this problem stashed somewhere.

James


Top
   
PostPosted: Thu Jun 06, 2019 6:03 am 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Sat Jun 02, 2018 10:38 am
Posts: 80
Quote:
A decent machine shop can machine the block and fit a bearing-as it should have been originally. Not cheap though.
I have a block with this problem stashed somewhere.

James
Thanks, James - good to know! And I agree: a plain bearing seems crazy, for the cost of casting a block to accept a roller bearing, but then Triumph never expected the engine to be running 45 years on I guess?

This car in general is in pretty bad shape (read: long term project whilst I enjoy my 1850), so I’m happy to take my time to get it right. It would save a lot of back pain however if this car could power itself backwards / forwards as she’s a heavy old girl: Do you think this engine could do that, sounding as it is, or should it be really be fixed first? I probably need to identify the problem first, eh? Cheers! Mike.

_________________
Bradman.

Current classic cars: 1974 Triumph Dolomite (Honey), 1978 Triumph Dolomite Sprint (Holly), 1974 Triumph Spitfire 1500 (Pepper)
Current modern cars: 2010 Mini One (Rusty), 2019 BMW i3 (Treehugger)
Past cars: 2003 BMW Z4 roadster 3.0 (Marty), 1972 Triumph Spitfire IV with 2.0 I6 (Polly), 1972 Ford Escort 1100L with RS2000 running gear (Nora Batty)


Top
   
PostPosted: Thu Jun 06, 2019 8:05 am 
Offline
TDC Notts,Derby & Leics Area Organiser
User avatar

Joined: Sat Jun 14, 2008 11:15 pm
Posts: 233
If it was me I'd make sure that it wasn't something that's likely to bring the timing chain off before I ran it regularly.
The deeper noise does sound to be coming from the front to me,and the ticking noise is probably the valve clearances.

It's easy enough to take the timing cover off,and you can undo the crank pulley bolt easily by putting your socket on a bar and wedging it somewhere it can't move. A quick turn on the starter should have the bolt loose. Socket size is 1 1/2 inch or 38mm.

James


Top
   
PostPosted: Thu Jun 06, 2019 8:39 am 
Offline
Future Club member hopefully!
Future Club member hopefully!
User avatar

Joined: Sat Jun 02, 2018 10:38 am
Posts: 80
Quote:
If it was me I'd make sure that it wasn't something that's likely to bring the timing chain off before I ran it regularly.
The deeper noise does sound to be coming from the front to me,and the ticking noise is probably the valve clearances.

It's easy enough to take the timing cover off,and you can undo the crank pulley bolt easily by putting your socket on a bar and wedging it somewhere it can't move. A quick turn on the starter should have the bolt loose. Socket size is 1 1/2 inch or 38mm.

James
Brilliant, and good tip on the socket + bar, thanks James! If it’s not raining here on Sunday I’ll have a good poke around... Cheers, Mike.

_________________
Bradman.

Current classic cars: 1974 Triumph Dolomite (Honey), 1978 Triumph Dolomite Sprint (Holly), 1974 Triumph Spitfire 1500 (Pepper)
Current modern cars: 2010 Mini One (Rusty), 2019 BMW i3 (Treehugger)
Past cars: 2003 BMW Z4 roadster 3.0 (Marty), 1972 Triumph Spitfire IV with 2.0 I6 (Polly), 1972 Ford Escort 1100L with RS2000 running gear (Nora Batty)


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 28 posts ]  Go to page 1 2 Next

All times are UTC


Who is online

Users browsing this forum: Bing, DotBot [Bot], Google and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited