new member mx5 1.6 conversion.

[xvivalve]

More superb work Phil.

With your other car providing good metal for all of these repairs, are you sure you're doing the right car???

[Philgroom]

More superb work Phil.

With your other car providing good metal for all of these repairs, are you sure you're doing the right car???

I'm sure I'm doing the right car. The old boot lid has provided most of the metal for the patches so far!

[Philgroom]

Today I thought I'd repair the left eyebrow but after a few hours of cutting I've found a solid starting point! Cleaned up, rust treatment and primed ready to be made solid again.

[Philgroom]

A few more pics

[xvivalve]

Looks as if your’s might be salvageable, but I’ll just leave this photo’ here for others to see. £32 delivered via Club spares:



Both sides available

[Philgroom]

Looks as if your’s might be salvageable, but I’ll just leave this photo’ here for others to see. £32 delivered via Club spares:



Both sides available

I will probably make them myself but didn't see them on the spares list.

[xvivalve]

They're not on there...yet...

[Philgroom]

Started to build up the front corner. Had to temporarily clamp the outer panels on to make sure they all line up again. Found the repair panel for the top valance is going to need a bit of modifying as it sticks out past the front of the wing quite a bit.

[Philgroom]

A couple more pics