Sprint rear brake flexi needed

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Post Reply
Message
Author
Sprint36

Sprint rear brake flexi needed

#1 Post by Sprint36 »

Anyone know where to get Sprint flexi hoses cheap and quickly. I was thinking of getting stainless braided, but I need it quickly so I'll settle for a standard one.

David
User avatar
Mad Mart
TDC Member
Posts: 8535
Joined: Tue Oct 03, 2006 5:48 pm
Location: Winscombe, North Somerset, England
Contact:

#2 Post by Mad Mart »

Rear flexi, I believe I have a standard one. When do you need it by?

Edit: There's usually a set of braided ones on ebay.
Sprintless for the first time in 35+ years. :boggle2: ... Still Sprintless.

Engines, Gearboxes, Overdrives etc. rebuilt. PM me.


2012 Porsche Boxster 981 S


Image
User avatar
tinweevil
Guest contributor
Guest contributor
Posts: 3936
Joined: Tue Oct 03, 2006 5:42 pm
Location: Forest of Dean

#3 Post by tinweevil »

Rimmers. Call em now rather than doing it online and you should have it tomorrow morning so long as you don't live in the wilds. Explain the situation and I've found them to be very helpful in the past. £15.22 plus a couple of quid delivery doesn't seem expensive for the fit and forget variety to me and I'm as tight as they come. I don't think the current 20% off offer covers phone orders. If next week will do order online and you'll have it Monday or Tuesday latest.

Or try Wins, his post office pickup is at about 4 iirc.

Tinweevil
1978 Pageant Sprint - the rustomite, 1972 Spitfire IV - sprintfire project, 1968 Valencia GT6 II - little Blue, 1980 Vermillion 1500HL - resting. 1974 Sienna 1500TC, Mrs Weevils big brown.
User avatar
Reg
Guest contributor
Guest contributor
Posts: 1264
Joined: Wed Oct 04, 2006 8:10 pm
Location: Darn saarf..

#4 Post by Reg »

stevson brothers...birmingham(iirc) around 27quid..
User avatar
xvivalve
TDC West Mids Area Organiser
Posts: 13592
Joined: Thu Sep 28, 2006 1:13 pm
Location: Over here...can't you see me?

#5 Post by xvivalve »

If you'd had the other axle you'd have had a free braided one...
Sprint36

#6 Post by Sprint36 »

Alun, Doh! Would I have had wheel cylinders that worked too?

Got a braided hose set from Rimmers in the end and put the front ones into storage.

David
Post Reply