Page 2 of 2
Re: 2 piece weber manifold setup
Posted: Sun Feb 28, 2010 3:57 pm
by Hans ten Broeke
Nice colour, Inca yellow
, oh s##t its only the dustbin.
Hans
Re: 2 piece weber manifold setup
Posted: Mon Mar 01, 2010 2:15 am
by speedracer
Hi Jeroen,
The electric water pump is on all the time, its speed is controlled by a temp sender in the thermostat housing - because of this there is no stat in the system.
There is a separate booster water pump that circulates the flow from the manifold outlet through the heater circuit.
Glad you like the bin Hans - i might have to use part of it as a rear spoiler!
PS: I've taken a punt on the TR7 FI pump cover as it's only 5 quid (plus 8 quid to ship
)
Re: 2 piece weber manifold setup
Posted: Tue Mar 02, 2010 2:22 pm
by Hans ten Broeke
Here you can see a picture of a new complete set.
As you can see the set comes with a kind adaptor to use with the original pump cover.
The manifold is better than the most seen one, this manifold has exactly the same length of the runners, is a nice casting, and has the brake assistance line connected to all the 4 tubes.
A very good manifold for a TBI set up also.
If interested, of line please.
Hans
Re: 2 piece weber manifold setup
Posted: Thu Mar 04, 2010 6:05 am
by speedracer
Having real trouble getting in contact with PO to see if he forgot to supply that bit
Hans, do you have a part number for that adaptor?
Re: 2 piece weber manifold setup
Posted: Thu Mar 04, 2010 4:59 pm
by Hans ten Broeke
There is no pn on this adaptor.
Hans