The Triumph Dolomite Club - Discussion Forum

What thread is in the door pins? I thought it was a random self tapper type of thread on the bar/rods they screw on to? Look very nice

Tony

tony g wrote:What thread is in the door pins? I thought it was a random self tapper type of thread on the bar/rods they screw on to? Look very nice

Tony

If they're aluminum then a slightly over-size hole would probably let it self-tap enough - it's not like they have that much force on them. I can't imagine you'd be able to machine a custom internal thread that small on a lathe (although I always underestimate what people can do with enough experience).

Either that or you cut the end of the rod off they fit on to and put a known-thread bolt/threaded bar on it.

Steve

Thanks guys. Steve got it right. They are brazed onto a piece of threaded rod:) like this.

Ah cheeky Nice work.

Tony

Cheers tony. My harnesses arrived today. Very very pleased!!

Ok so here are progress pictures up until now:D

Found this beauty online.



The underside has had a lot of attention!









Then this was liberally applied.









Still a little thin in places so another 6 are ready to be applied. But whilst we were waiting for deliver we got on with the arches.






The o/s/r arch is now all glued on in the final position. Also got the holes drilled for the n/s/r



And bolted on:D








And that's it so far!
More soon

Ok so to keep you all up to date here's progress:)
Doors are now almost filled perfectly and all shut lines are perfect very pleased there





Also both rear arch sections are now glued on and filled.













Just chucked the front wings and arches on so we could have a moment of joy:D







We also gave the floor of the car a coat of black whilst we were hanging around waiting for filler to dry:D





And that's you all up to date. Hoping to get ready for a second and final coat of stone chip this Sunday.
Stay tuned!

Ok let's get you all up to speed! Loads of pics I'm afraid as I've been neglecting my forum updating duties.









Sound deadened the roof



Painted the rear axle.



Loads of pics to follow. Will continue later:p

Can't wait to see the finished article!

This is truly inspirational stuff! thank you for sharing. I reckon that car will be twice as good as it was when it came off the line..

Can I ask what the soundproofing on the roof is?

I've just started on my Dolly (fully stripped mechanically and on rotisserie), so I'm still in the state of depression and awe at how much work there is to do, but I'm looking forward to following in your footsteps.

Pete

Thank you guys. The sound proofing is from eBay. Item number 252645645801

Front subframe needed repair.



So we cut the cups out of another subframe



And then welded them in.



Then time for paint!



And of course fitting

Got all the front suspension arms grit blasted.



Then more paint.



And some poly bushes.



I've also got the front calipers fully rebuit and painted. They were pretty grubby.



Got them all de rusted.



And then new Pistons.



Then the fun part.





Over the moon with them. Got some stainless nipples too:D



Still more to update:D

Schwing!

Ok carrying on with the catch up:p

Got both front ball joints stripped and rebuilt.







Also modified the front hubs for the amazing tracker jack brake kit.









And we have built the rear coilovers and fitted them:D



Oh and this beauty arrived.



Stainless big bore downpipe:D

More soon!

The gearbox took a fair bit of cleaning. But I'm very happy with the result:D























Very pleased