Page 3 of 3
Re: Hi.......
Posted: Fri Apr 14, 2017 1:51 pm
by shaunroche
sprint95m wrote:Shaun, you any further on with this?
Ian.
Kind of Ian, it turns out I haven't got a blank bypass tube fitted which i knew nothing about, only the normal one, and I've also got a bottom entry plastic expansion tank coming, so when they're fitted, I'll let you know!
It's on going shall we say!
I can't do much now as all my bits haven't arrived (with it being the bank holiday), I'm working away during the week and next weekend I'm in Glasgow all weekend watching Hue & Cry, so a bit strapped for time!
Will keep you posted!
Aha....
Posted: Fri Apr 14, 2017 4:42 pm
by sprint95m
I fitted core plugs into the inlet manifold and water pump cover so I could do away with the (obsolete) bypass tube.
Doing this permitted the inlet manifold to be attached to the head using studs,
which makes fitting somewhat easier
.
Hue and Cry? Yes I do vaguely remember them from the 80s or was it the 90s?
Ian.
Re: Capillary temp gauge....
Posted: Fri Apr 14, 2017 5:07 pm
by Toledo Man
Ian, they had a few minor hits in the 1980s. I was listening to "Labour of Love" in the car today.
Re: Capillary temp gauge....
Posted: Mon Apr 17, 2017 9:00 pm
by new to this
Had a look at the back of the head today,theres a bit of room to fit a capillary tube in there,so made a wooden template to see if the capillary tube wood fit,have ordered some alli and hose tail,it looks like a nice mod to do
Dave