National Restoration Show & Autojumble Sun 25th October

[jeffclane]

Think i have a spare welding curtain somewhere, tho will need to knock up a stand for it. I'll have a look. Should be able to knock up a stand. Will let you know.

Jeff

[triumphdolomiteuk]

Confirmed volunteers so far (as of today);
Mad Mart
Purplebargeken
Mig Wielder
DavePoth
Miniman
Alfabax
Michael C
Pimento Sprint (David S)
xvivalve
Tom
Triumph1300
Steve
AP
Jeff Lane
Jannette

Anyone else? PM me if I've missed you off the list.

The passes have arrived at TDC HQ, although there aren't enough for everyone. We'll be able to buy a few more, so don't panic. The next step will be to organise the distribution of the passes and sort out what time we'll be setting up the stand on the Saturday/Sunday. Just be aware that the exhibitors passes are only valid during set up times (i.e. Saturday 2pm - 9pm, Sunday 7am - 9.30am).

[Purplebargeken]

I'll be there as early as possible on Sunday morning. I have to collect some bits of metal fairly locally before going on to Stoneleigh. I'll be travelling in the Amica. Andy, do you need the reg number?

Cheers

Ken

[Mad Mart]

Are there any oily bits to do? Engine strip/rebuild, suspension bushes etc. etc.

[DavePoth]

Are there any oily bits to do? Engine strip/rebuild, suspension bushes etc. etc.

I can bring my whole front suspension if you like.

[TLC]

Are there any oily bits to do? Engine strip/rebuild, suspension bushes etc. etc.

I can bring my whole front suspension if you like.

I can bring my back axel to be stripped down and the bits put back into the new one :wink

Let me know if its wanted

[Mad Mart]

OK, that's more like it.

[triumphdolomiteuk]

As mentioned above, we have 10 exhibitors passes for the show. These will be given to members who will be working on the Club stand and are valid from 2.30pm - 9pm on the Saturday and 7am - 9.30am on the Sunday. The plan is for Tom's car to be moved into the hall on the Saturday afternoon and for the display equipment to be set up (nothing fancy for this show, the emphasis is on the cars being worked on). Tom (or A.N.Other) will be on duty at the main entrance to Stoneleigh on the Sunday morning to distribute passes to members turning up to work on the stand. If you are not intending to be there before 9.30am, please let me know so that I can give your pass to someone else (we haven't enough to go round so we will need to buy extras at a tenner each).

[Purplebargeken]

I'll be there in the little red Hyundai LT57 UUL as early as possible.

[triumphdolomiteuk]

Would anyone like to demonstrate polishing a set of Sprint alloys at the show? A set will be delivered to the stand which needs a "clean up". Anyone?

[Purplebargeken]

Never done it Andy. Haven't even got the stuff to do it

[Triumph1300]

I'll be collecting from the Farm the following items on Saturday, which will be at Stoneleigh Saturday afternoon.

I'll take away Sunday.

Banner + Banner stand
5 off Sprint alloys

Trestle table

Old magazines

Table covers

Anything else needed?

Please remember, I won't be there until Sunday afternoon, but will help with any set up required on Saturday.

[barry55]

I can help setting up on saturday if needed.

[xvivalve]

We will need some panel clamps, lots of them....

[MIG Wielder]

Hi All,
Hope to be there from about 08:45 on Sunday.
@ Andy : Yes, I do have a Sprint alloy polishing kit and lots of the compound. From my experience from about 09:00 till 17:00 is enough time to do about 2 1/2 wheels. This assumes they are not really corroded, they haven't been laquered and its just the outer alloy that needs polishing. I'd need extra time for removing paint (Nitromors) and any remaining laquer (thinners ) definitely outside the main work area. They won't have the same finish as diamond turned alloys but still look "O.K.".
If I am nominated for wheel polishing I think I should be slightly remote of any nice polished cars as it is quite dusty, grotty work. Shove me away in a corner somewhere.
Apart from that, yes, can do , unless you think I'd be more useful "spannering".
@ Alun ; And yes I have a fair number of the " Intergrip" panel clamps I can bring along.
Can bring 13A extension lead with ELCB etc; etc;
Any nominations for transport of parts from Reading / Farnborough Hants area to / from Stoneleigh that I can do while I'm around ?
I have one possible from Tin so far.
Cheers All,
Tony TDC 0091