The Triumph Dolomite Club - Discussion Forum http://forum.triumphdolomite.co.uk/ |
|
Track Sprint Resto http://forum.triumphdolomite.co.uk/viewtopic.php?t=21457 |
Page 2 of 11 |
Author: | Mad Mart [ Mon May 07, 2012 3:29 pm ] |
Post subject: | Re: Track Sprint Resto |
Quote: Wow Mart, just been looking at your pix and I reckon mines better than that, at least from the waist up! Steve
Could be Steve, from the window line upwards at least. Good luck with yours though, looks like a lot of welding ahead. I will follow your resto closely.
|
Author: | Mad Mart [ Mon May 07, 2012 3:34 pm ] |
Post subject: | Re: Track Sprint Resto |
Right, I think I'm about finished, subject to Jon having a quick look over it before it goes off to the body shop. Removed the servo, door handles & locks. Made some holes a bit larger. |
Author: | DoloWIGHTY [ Mon May 07, 2012 5:34 pm ] |
Post subject: | Re: Track Sprint Resto |
Here we go folks....hang onto your hats it's another Mad Mart resto topic. |
Author: | DazasDolly [ Mon May 07, 2012 6:49 pm ] |
Post subject: | Re: Track Sprint Resto |
Quote: Here we go folks....hang onto your hats it's another Mad Mart resto topic.
|
Author: | Mad Mart [ Sat May 12, 2012 8:04 pm ] |
Post subject: | Re: Track Sprint Resto |
I took the DA to the whole car today. Got all the glue off the roof... Found another hole in the front passenger door... Not sure if I'm going to do any more to it tomorrow, I'll see what I feel like. Jon the sprayer will hopefully be picking it up early next week. |
Author: | DF [ Sat May 12, 2012 8:11 pm ] |
Post subject: | Re: Track Sprint Resto |
you could do with some carbon |
Author: | soe8m [ Sat May 12, 2012 8:12 pm ] |
Post subject: | Re: Track Sprint Resto |
No panels left is still lighter than carbon. Jeroen |
Author: | Mad Mart [ Sat May 12, 2012 8:30 pm ] |
Post subject: | Re: Track Sprint Resto |
I wish. |
Author: | Mad Mart [ Fri May 18, 2012 8:24 pm ] |
Post subject: | Re: Track Sprint Resto |
Jon the sprayer's transporter has been waiting for an MoT so he had to borrow something else to pick the track Sprint up just now... |
Author: | DoloWIGHTY [ Sat May 19, 2012 4:57 pm ] |
Post subject: | Re: Track Sprint Resto |
Be seeing you.... |
Author: | xvivalve [ Sat May 19, 2012 8:52 pm ] |
Post subject: | Re: Track Sprint Resto |
Quote: Wow Mart, just been looking at your pix and I reckon mines better than that, at least from the waist up! Steve
Strewth, I thought the topic was still centred around Mary for a moment there! Can I sell this early shell to someone else now then? |
Author: | Mad Mart [ Sun May 20, 2012 4:40 pm ] |
Post subject: | Re: Track Sprint Resto |
Yes, sorry Alun, I should have said something. |
Author: | Oli_88 [ Sun May 20, 2012 7:21 pm ] |
Post subject: | Re: Track Sprint Resto |
I bet your neighbours loved you when that transporter turned up. |
Author: | xvivalve [ Sun May 20, 2012 9:39 pm ] |
Post subject: | Re: Track Sprint Resto |
No worries, I've been hawking it to anyone who'd listen anyway |
Author: | Mad Mart [ Tue May 22, 2012 12:27 am ] |
Post subject: | Re: Track Sprint Resto |
After stripping the engine down on Saturday I made a start on rebuilding the head this evening. Lapped all the valves in... Valves all cleaned up... New valve springs! As you can see the new springs (right) are a couple of mil longer than the old ones, no surprise there. Then as I went to fit the first one & orient it the right way up I noticed there wasn't a right way up. ie. it doesn't have the closer coils at one end. These springs were given me a few years ago and on the box they are labelled for a Sprint & Stag. Question is, should they be ok to use? |
Page 2 of 11 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |