New member/ advice!
Posted: Tue Aug 18, 2015 5:53 pm
g[/attachment][img][/Hi folks,
Only joined the club at the start of August, my name is Gary and live in South Queensferry about ten mins from Edinburgh, had a 1500 tc as my first car and have always had a notion for another one so at the start of July I picked up DJL 244V (1500 HL) russet brown, since then I have already spent hours and hours on her and loved every minute so far, I'm no mechanic but do have the luxury of a very good mate who is and I also have use of a garage which makes things a lot easier. My wee dolly started off pretty well with not much rust at all from rear to front, all good so far, all cut out and repaired but now we have welded all the dodgy bits apart from front panel headlamp holders valance etc which are to be honest a bit past it! Bought a fibreglass wing from rimmers for the n/s which was beyond repair too but now have purchased a "Chick Doig" restored 1500tc which is accident damaged, but fit for the parts I need I'm glad to say so now have a donor vehicle VHO 749V.
Questions I have
1, am I best keeping it russet Brown? (Original colour)
2, in the donor car it has a auto box ( am I better using that engine and box) or sticking with the original manual box and original engine?
Both are looking like they are in good condition and both sounding really sweet? Since I'm new to this I'm looking for a bit help/advice on the best way forward, got the car stripped the now and hopefully it will be going in for a full respray the first couple of weeks in September, then get it back and fit whatever units you think best?
Doing a good bit work to it to bring it back to a decent standard and want to do what's best for the motor, got loads of new parts to fit to it too bushes, shocks, brakes, etc etc etch of any advice would be greatly appreciated. Will try and post some photos but pretty useless with these computers!
With anticipation,
Gary Deuchars.
Only joined the club at the start of August, my name is Gary and live in South Queensferry about ten mins from Edinburgh, had a 1500 tc as my first car and have always had a notion for another one so at the start of July I picked up DJL 244V (1500 HL) russet brown, since then I have already spent hours and hours on her and loved every minute so far, I'm no mechanic but do have the luxury of a very good mate who is and I also have use of a garage which makes things a lot easier. My wee dolly started off pretty well with not much rust at all from rear to front, all good so far, all cut out and repaired but now we have welded all the dodgy bits apart from front panel headlamp holders valance etc which are to be honest a bit past it! Bought a fibreglass wing from rimmers for the n/s which was beyond repair too but now have purchased a "Chick Doig" restored 1500tc which is accident damaged, but fit for the parts I need I'm glad to say so now have a donor vehicle VHO 749V.
Questions I have
1, am I best keeping it russet Brown? (Original colour)
2, in the donor car it has a auto box ( am I better using that engine and box) or sticking with the original manual box and original engine?
Both are looking like they are in good condition and both sounding really sweet? Since I'm new to this I'm looking for a bit help/advice on the best way forward, got the car stripped the now and hopefully it will be going in for a full respray the first couple of weeks in September, then get it back and fit whatever units you think best?
Doing a good bit work to it to bring it back to a decent standard and want to do what's best for the motor, got loads of new parts to fit to it too bushes, shocks, brakes, etc etc etch of any advice would be greatly appreciated. Will try and post some photos but pretty useless with these computers!
With anticipation,
Gary Deuchars.
