Page 1 of 1
Gearbox Crossmember Fixungs
Posted: Sun Nov 29, 2015 4:03 pm
by AlanH
Just replacing my gearbox mount but looking at the workshop manual it seems there should be some distance tubes which I don't have.
I'm not sure exactly what they are for and I cannot find anybody that sells them.
- crossmember.JPG (39.7 KiB) Viewed 782 times
Re: Gearbox Crossmember Fixungs
Posted: Sun Nov 29, 2015 4:23 pm
by PaulB
This looks very similar to the Sprint and Stag cross member mountings.
Try part number 138507 on Paddocks website. Its a spacer and is part of the JPS274P Stag cross member mounting kit.
Re: Gearbox Crossmember Fixungs
Posted: Mon Nov 30, 2015 1:06 pm
by MIG Wielder
Hi Alan, The picture looks like an automatic cross-member and gearbox mount. If so the 1976 parts list doesn't list any spacers. The gearbox cross-member is simply hard mounted to the bodywork with 2 nuts and washers for all 1500 / 1850 and Sprint variants. If its an early non-overdrive early 1850 then this does have a series of spacers and rubber bushes on the outer edges with the cotton-reel style gearbox mounts. I can't find a 1300 /1500 variant though.
Tony.
Re: Gearbox Crossmember Fixungs
Posted: Mon Nov 30, 2015 1:48 pm
by RJF_70
Alan when I did mine it was just nuts and washers, no spacers as such and that's whats came off it, I didn't lose them.
Rich..
Re: Gearbox Crossmember Fixungs
Posted: Mon Nov 30, 2015 9:38 pm
by AlanH
Thanks for the info. guys.
I will just bolt it back on, there is no room for bushes anyway.