The Triumph Dolomite Club - Discussion Forum

Can anyone point me in the direction of the part numbers (perhaps even suppliers) of the white plastic or nylon shrouds for the single bullet connectors used on the Dolomite loom? I need the housings for both male and female connectors.
My parts book is with the car - at the MOT station.

These are pin connectors in most cases, not bullets.

You need the Alun Nicholas ball pen refill trick to slide over the pin and push the lugs down so you can get them off....

Good luck finding new ones....I pinch mine from old looms

Jonners

Wrong colour, but is the second link the correct item?
http://www.autosparks.co.uk/electrical- ... plugs.html

http://www.autosparks.co.uk/electrical- ... inals.html

I'd say yes thats them. They make harnesses for dolomites and a pic on their site shows the black connectors instead of white.

Tony

tony g wrote:I'd say yes thats them. They make harnesses for dolomites and a pic on their site shows the black connectors instead of white.

Tony

Perfect, thanks Tony.