Page 1 of 1
Bonnet bulkhead weather seal
Posted: Sun Jul 03, 2016 7:02 pm
by simonhorton
Hi All,
Where's the best place to buy a seal from
Photo enclosed
Thank you
Re: Bonnet bulkhead weather seal
Posted: Sun Jul 03, 2016 8:05 pm
by HQentity
Hiya Simon
I recently bought one from rimmers, it's good quality and they gave a bit extra length. Only thing I would say is the bonnet has raised a few mm on one side, but I'm convinced that was my haphazard fitting rather than the product.
Re: Bonnet bulkhead weather seal
Posted: Thu Jul 07, 2016 2:39 pm
by bazyerma
Rimmers have it below, its not a formed shape
http://www.rimmerbros.co.uk/Item--i-717594
Regards
Barry
Re: Bonnet bulkhead weather seal
Posted: Thu Jul 07, 2016 2:50 pm
by Galileo
Take a look at madmarts last few posts on Project XJX (Pimento Sprint) and he mentions Phoenix Trim.
Re: Bonnet bulkhead weather seal
Posted: Thu Jul 07, 2016 2:50 pm
by shaunroche
Would you believe I've just ordered one of these on the advice of MadMart from
http://www.phoenixtrim.co.uk - it's part number SRS 116 and is £13 for 3m......
SRS 116 x £4.20 per metre x 3 metres = £12.60
P&P 1st class = £5.90 or 2nd class = £5.40
kaye@phoenixtrim.co.uk