Page 1 of 1
Parcel Tray Diagram
Posted: Mon May 29, 2017 12:17 pm
by ham204
My parcel tray has definitely seen better days and I think I can copy the cardboard as the front foam thingy looks ok.
Does anyone have a diagram showing the the cardboard parts and their dimensions? The part on the driver's side is all but missing.
Re: Parcel Tray Diagram
Posted: Mon May 29, 2017 2:32 pm
by Carledo
I have an excellent parcel tray here (accounted for, unfortunately) from the 1500HL I have just broken. If you give me a few days, I will measure it all up and do a drawing. The real thing is made up if several bits of millboard, some folded and some stapled together.
Now I finally have a really good pattern, I will probably be showing it to Cliff at Aldridge Trimming as well to see if they can make a pukka replica one for the club. They already do these for Spitfire, GT6, TRs etc.
Steve
Re: Parcel Tray Diagram
Posted: Tue May 30, 2017 9:19 am
by ham204
Carledo wrote: ↑Mon May 29, 2017 2:32 pm
I have an excellent parcel tray here (accounted for, unfortunately) from the 1500HL I have just broken. If you give me a few days, I will measure it all up and do a drawing. The real thing is made up if several bits of millboard, some folded and some stapled together.
Now I finally have a really good pattern, I will probably be showing it to Cliff at Aldridge Trimming as well to see if they can make a pukka replica one for the club. They already do these for Spitfire, GT6, TRs etc.
Steve
That would be great Steve. I once replaced the tray from the 1300FWD many moons ago (and I was more flexible !) but then I had a good but tattered original. This one has chunks missing.