Page 1 of 1
Carb/airbox rubber bobbin
Posted: Wed Nov 22, 2017 10:07 am
by SprintMWU773V
Can anyone advise the size or even where I can get one of the rubber cotton reel bobbin mounts that fixes to the carbs and helps to dampen the air box and fuel line? Mine has long since disintegrated. I don't imagine they are hard to find but have no idea on the size.
Re: Carb/airbox rubber bobbin
Posted: Wed Nov 22, 2017 10:17 am
by Magenta Auto Sprint
http://www.avindustrialproducts.co.uk/d ... obbins.pdf
the original thread is 1/4 unf, unsure of the thickness of the rubber but I believe it is about the 1/2 area,
Malcolm
Re: Carb/airbox rubber bobbin
Posted: Wed Nov 22, 2017 12:28 pm
by dollyman
I dont know the size, but Peugeot and Citroen use similar on the plastic cover that sits on top of the engine under the bonnet so might fit?
Cheers, Tony.
Re: Carb/airbox rubber bobbin
Posted: Wed Nov 22, 2017 3:41 pm
by Triumph1300
Or airhead bmw motorcycle battery box mounting Robbins, try motobins, or motoworks
Re: Carb/airbox rubber bobbin
Posted: Wed Nov 22, 2017 4:45 pm
by MIG Wielder
The Sprint one is the same as the 1850 : UKC2451. In fact its a very common Triumph part on the Stag / 2000 / TR% /TR6 etc; etc; Moss have them currently.
Re: Carb/airbox rubber bobbin
Posted: Wed Nov 22, 2017 4:45 pm
by GTS290N
Or fit club solid alloy mounts, no need for the bobbin. (well, on an 1850 for sure, dunno about Sprint?)
Re: Carb/airbox rubber bobbin
Posted: Wed Nov 22, 2017 8:07 pm
by Flyfisherman
SprintMWU773V wrote: ↑Wed Nov 22, 2017 10:07 am
Can anyone advise the size or even where I can get one of the rubber cotton reel bobbin mounts that fixes to the carbs and helps to dampen the air box and fuel line? Mine has long since disintegrated. I don't imagine they are hard to find but have no idea on the size.
Mark
sizes are
viewtopic.php?f=4&t=32265
Paul
Re: Carb/airbox rubber bobbin
Posted: Wed Nov 22, 2017 8:38 pm
by SprintMWU773V
Super stuff thanks