The Triumph Dolomite Club - Discussion Forum

On the bootlid the little plastic inserts that hold the badge pins, does anyone know which type and where from please?

Cheers

Tony

Found them GHF1532

Tony

Bresco sell them as well as all the other trim clips etc

Cheaper than some other Suppliers.

Ill have a look. Its more for postage than 40 inserts from most suppliers . I only need 2 lol

Tony

Its amusing how many things are £7.49 on bresco site lol

Tony

Tony

Both Paddocks & Rimmerbros have them in stock, but then add the postage makes them dear to purchase.

http://www.jamespaddock.co.uk/badge-retaining-clip-6

paul

Yes the postage is daft. I ordered 40 of them from bresco so should last me me all my life lol.

Cheers

Tony

tony g wrote: ↑Sun Jul 22, 2018 9:39 pm Its amusing how many things are £7.49 on bresco site lol

Tony

I noticed that when I done a large order.

Or use sticky pads

Its for the boot badges and they have a small raised edge at each end so there would be very little contact for the pads
Cheers

Tony

SprintMWU773V wrote: ↑Tue Jul 24, 2018 9:00 am Or use sticky pads

When I put the Carledo together with it's GRP front end and brand new NOS bootlid (which wasn't drilled for the badges and trim strips) To reduce the risk of corrosion setting in (and save time and effort) I left the trim strips off and affixed all the badges with a double sided thick badge tape that you can get from any bodyshop suppliers. The boot badges took 2 thicknesses, but have been there since 2012 and show no sign of falling off!

Steve

I did come across some badge pin holes the other day. If you need some still I may have some if you PM me your address.

Ive got some ordered now Mark but thanks anyway

Tony

SprintMWU773V wrote: ↑Tue Jul 24, 2018 1:02 pm I did come across some badge pin holes the other day. If you need some still I may have some if you PM me your address.

Bit late for April fools isn't it Mark?

Steve