Page 1 of 1
Engine Mount on 1850HL Dolomite Auto
Posted: Sun Mar 17, 2019 10:00 am
by tomcat784
Hi,im new to this forum,
Ive recently bought a triumph dolomite 1850HL auto 1978
The offside engine mount has got the top bolt missing,going into the engine block
would anybody be able to tell me what size this bolt is.
Thanks Steve.
Re: Engine Mount on 1850HL Dolomite Auto
Posted: Sun Mar 17, 2019 12:38 pm
by yorkshire_spam
Hi Steve,
Are we talking about HU0805 as shown here:
If so the hardware catalogue lists it as:
5/16" UNF @ 5/8" length.
http://tecb.eu/onewebmedia/Standard_Tri ... atalog.pdf
Cheers,
Sam
Re: Engine Mount on 1850HL Dolomite Auto
Posted: Sun Mar 17, 2019 6:27 pm
by tomcat784
Hi Sam,
Thanks for your help,much appreciated
That was the information i needed.
Cheers Steve.
Re: Engine Mount on 1850HL Dolomite Auto
Posted: Sun Mar 17, 2019 6:31 pm
by yorkshire_spam
You are welcome! Us 1850 Auto owners have to stick together!
Re: Engine Mount on 1850HL Dolomite Auto
Posted: Sun Mar 17, 2019 6:47 pm
by soe8m
Re: Engine Mount on 1850HL Dolomite Auto
Posted: Sun Mar 17, 2019 7:25 pm
by dollyman
yorkshire_spam wrote: ↑Sun Mar 17, 2019 6:31 pm
You are welcome! Us 1850 Auto owners have to stick together!
I will second that Sam
Nothing wrong with auto's Jeroen
Tony.
Re: Engine Mount on 1850HL Dolomite Auto
Posted: Sun Mar 17, 2019 9:50 pm
by MIG Wielder
yorkshire_spam wrote: ↑Sun Mar 17, 2019 6:31 pm
You are welcome! Us 1850 Auto owners have to stick together!
I'll second that ! Welcome to the forum.
My later 1850 parts book gives that bolt as part no SH605051 plus a spring washer GHF332.
Which Mr Rimmer's useful cross reference says is
Part No.: SH606051
Screw - 3/8 inch UNF x 5/8 inch - SH606051 So a set-screw rather than a bolt.
Near enough to the item that Sam mentions.
Tony.
Re: Engine Mount on 1850HL Dolomite Auto
Posted: Sun Apr 14, 2019 7:58 pm
by tomcat784
hi Tony sorry i havent replied before now, thankyou for the information i have now sorted this problem out
cheers steve
