Sprint headlamp bezel fixing screws
Posted: Fri Mar 22, 2019 8:37 pm
What size screw hold the bezel in place. Looked at Mike B's how to spot an early one page, but I can't make out if they're 8's or 10's.
Graham
Graham
The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
https://forum.triumphdolomite.co.uk/
GrahamGrahamFountain wrote: ↑Fri Mar 22, 2019 8:37 pm What size screw hold the bezel in place. Looked at Mike B's how to spot an early one page, but I can't make out if they're 8's or 10's.
Graham
I was looking at 10s cos the holes are a bit worn, and I think 6s would pull through. But 8s seem to work.Flyfisherman wrote: ↑Fri Mar 22, 2019 9:52 pmGrahamGrahamFountain wrote: ↑Fri Mar 22, 2019 8:37 pm What size screw hold the bezel in place. Looked at Mike B's how to spot an early one page, but I can't make out if they're 8's or 10's.
Graham
they might be No.6 or No.8 and no bigger - I will check tomorrow for you
No, I mean the painted black outer surround for both headlamps. I think the part numbs are 817389 and 817388, but I aren't certain.new to this wrote: ↑Fri Mar 22, 2019 11:23 pm Garham
If you mean the chrome bezel to hold the headlight in place M6,if you mean the bowl to the inner lamp panel M8 ,but ive have used M5 rivnuts on mine
Dave