Page 1 of 1
Jet washer
Posted: Sun Aug 25, 2019 7:14 pm
by new to this
has any one been able to repair the Jet Washer mines come loose ?
Thanks Dave
Re: Jet washer
Posted: Sun Aug 25, 2019 7:58 pm
by cliftyhanger
new to this wrote: ↑Sun Aug 25, 2019 7:14 pm
has any one been able to repair the Jet Washer mines come loose ?
Thanks Dave
Jb weld did mine 10 years ago. I reckon any decent epoxy will do the trick, just clean everything well first
Re: Jet washer
Posted: Sun Aug 25, 2019 10:46 pm
by Richard the old one
I agree as I have had to use epoxy resin on most of mine.
Re: Jet washer
Posted: Mon Aug 26, 2019 9:58 am
by new to this
cliftyhanger wrote: ↑Sun Aug 25, 2019 7:58 pm
new to this wrote: ↑Sun Aug 25, 2019 7:14 pm
has any one been able to repair the Jet Washer mines come loose ?
Thanks Dave
Jb weld did mine 10 years ago. I reckon any decent epoxy will do the trick, just clean everything well first
Thanks hadnt thought about glues, i did try welding it but it didnt take on the brass part
thanks Dave
Re: Jet washer
Posted: Mon Aug 26, 2019 9:59 am
by new to this
Richard the old one wrote: ↑Sun Aug 25, 2019 10:46 pm
I agree as I have had to use epoxy resin on most of mine.
Thanks Dave
Re: Jet washer
Posted: Tue Aug 27, 2019 8:01 pm
by oily66
I thought the brass tube was loose to enable positioning the jet, by swivelling it.
If you hold the brass tube then reposition the hose then it holds it in the position.
If I’m wrong then I need to recrimp mine into place??
Re: Jet washer
Posted: Tue Aug 27, 2019 10:17 pm
by new to this
oily66 wrote: ↑Tue Aug 27, 2019 8:01 pm
I thought the brass tube was loose to enable positioning the jet, by swivelling it.
If you hold the brass tube then reposition the hose then it holds it in the position.
If I’m wrong then I need to recrimp mine into place??
My jet washer on the passengers side is fixed so think there meant to be fixed,the jet washer on drivers side is the one that moves
Dave
Re: Jet washer
Posted: Sat Aug 31, 2019 7:57 pm
by new to this
In the end I decided to braze it,this was the first time I've brazed not the neatiest but worked 
Dave