Page 1 of 1
Auto gearbox breather hose route
Posted: Fri Nov 29, 2019 11:21 am
by Matt Cotton
The breather hose is missing on my auto Sprint project. Having never had an auto before, can anyone advise the route the hose takes from the adapter? Does it just cable tie to the dipstick tube?
I've read on some of the Stag forums that the hose passes up by the servo and out through the top of the wing?
Any advice appreciated before I cut a new length to fit.
TIA
MC
Re: Auto gearbox breather hose route
Posted: Fri Nov 29, 2019 1:16 pm
by matt of the vivas
It comes upwards into the engine bay, along the OS of the brake servo. It then curls over the top of the servo and hangs down into the gearbox tunnel, ending up a few inches below the servo. Its secured with black tape over the top of the servo.
Re: Auto gearbox breather hose route
Posted: Fri Nov 29, 2019 1:33 pm
by Matt Cotton
Cheers for this Matt. Good job I checked!
Re: Auto gearbox breather hose route
Posted: Mon Dec 02, 2019 9:54 pm
by Matt Cotton
Has anyone got a picture of this I could see?
Re: Auto gearbox breather hose route
Posted: Tue Dec 03, 2019 8:22 pm
by Reg
Hello Matt.. Some pictures Sir, I hope they help.
The Garage is sooo cold tonight...brrr!
0.8 MB servo 001.JPG Check Error
0.8 MB servo 002.JPG Check Error
0.8 MB servo 003.JPG Check Error
0.8 MB servo 004.JPG Check Error
0.8 MB servo 005.JPG Check Error
0.7 MB servo 006.JPG Check Error
0.7 MB servo 007.JPG Check Error
0.8 MB servo 008.JPG Check Error
0.7 MB servo 010.JPG Check Error
Re: Auto gearbox breather hose route
Posted: Wed Dec 04, 2019 9:00 am
by Matt Cotton
Spot on. Many thanks for this Reg. I was hoping you would see this as you are the only one I know with a Sprint Auto.
Thanks for braving the cold to get the pics!