Head gasket thickness
Posted: Sat Dec 14, 2019 8:29 am
Hello
New engine project for Gr1 is at planning stage.
Homologation gives compression ratio 10,7:1, and also combustion chamber volume is fixed, so only variable is squish distance.
New HG uncompressed thickness is 2,0 - 2,1 mm. Is there another options for gasket? Or what might be compressed thickness of this head gasket?
New engine project for Gr1 is at planning stage.
Homologation gives compression ratio 10,7:1, and also combustion chamber volume is fixed, so only variable is squish distance.
New HG uncompressed thickness is 2,0 - 2,1 mm. Is there another options for gasket? Or what might be compressed thickness of this head gasket?