Page 1 of 1

XGK 976W

Posted: Fri Aug 21, 2020 5:44 pm
by TZbaz
This is the brown Sprint I have just bought , Reg number XGK 976W , Chassis number TWTLD5AT111505 which I have just found out was manufactured on the 9th July 1980 . I'm going to get it MOT'd in the next couple of weeks and then start a partial restoration over the winter , I'll keep you posted.


Image

Image

Image

Image

Image

Chris.

Re: XGK 976W

Posted: Fri Aug 21, 2020 6:01 pm
by RSi
Looks like a nice car, still with its original vinyl roof I think. 👌

Re: XGK 976W

Posted: Fri Aug 21, 2020 10:57 pm
by Bish
Nice one Chris, looks pretty tidy and not too much work to do?

I have a Russet car too. Proper old school colour. :thumbsup:

Keep us posted on how you get on.

Re: XGK 976W

Posted: Fri Aug 28, 2020 10:54 am
by TZbaz
MOT at 16.00 today , All brakes working , welding sorted and everything working as it should . She's a bit lumpy at tickover but runs fine when driving . Insured today for £79 fully comp so it's all coming together !

Chris.

Re: XGK 976W

Posted: Fri Aug 28, 2020 12:15 pm
by TZbaz
Image

Image

Chris

Re: XGK 976W

Posted: Fri Aug 28, 2020 12:52 pm
by Tony Burd
Good luck.

It looks like the rear exhaust mount is missing, usually a bobbin mount either on a bracket or drilled into the boot floor, unless you have it fixed on the original mounting inside the wheel arch?
Image

Re: XGK 976W

Posted: Fri Aug 28, 2020 6:49 pm
by TZbaz
The exhaust is held on with the bracket under the wheel arch and seems ok . The car passed the MOT with no problems so we're nearly there . Just waiting to get the tax sorted . Car goes really well but is a bit rough at low revs/speed . Bit of carb work to do I think .

Chris

Re: XGK 976W

Posted: Sat Aug 29, 2020 9:23 am
by Tony Burd
Cool well done on the MOT pass, that must be a custom exhaust.

Re: XGK 976W

Posted: Sat Aug 29, 2020 1:13 pm
by Reg
Congratulations on the MOT pass..love the matching dog! 8)

Re: XGK 976W

Posted: Fri Apr 23, 2021 9:30 am
by JPSPRINT
Excellent colour!