The Triumph Dolomite Club - Discussion Forum

I have been given a new unused Sprint cam which is in marked original box and label saying TTK10106 so is that a Triumphtune TT10106 spec made by Kent?.
On the figure measurement A=1.635" and B=1.195" so that gives a cam lift of 0.440" which doesn't seem to match the specs I have seen.
Can anyone confirm what it is please?

That's not too far off the figure I've got (0.408).Still a good mil difference though. I have just fitted an STR91 and when I measured the cam, as you have, I came up with a figure which was different than when I measured it in situ. That is quite a large base circle.