The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
https://forum.triumphdolomite.co.uk/
On the Dolomite there are 4 that hold the "brace" section behind the steering column and on the Toledo they do the same from what I can tellnew to this wrote: ↑Sun Aug 22, 2021 9:37 pm Do you mean the screws that hold the wood dash in place ? If so there used on Stags James Paddocks sell them and the washers
They are very short. probably only 1/2" or so long as they ONLY go through the millboard and into the Spire nut captive. Too long and they're BOUND to catch something they shouldn't back there!yorkshire_spam wrote: ↑Mon Aug 23, 2021 8:36 amOn the Dolomite there are 4 that hold the "brace" section behind the steering column and on the Toledo they do the same from what I can tellnew to this wrote: ↑Sun Aug 22, 2021 9:37 pm Do you mean the screws that hold the wood dash in place ? If so there used on Stags James Paddocks sell them and the washers
Parts diagrams on this thread: https://forum.triumphdolomite.co.uk/vie ... hp?t=26132
I think they are #8 self taps as they screw into p/n FU2564/8 and I am told the /8 indicates the screw size. I'll just guess the length and order some.
Good point Steve. The ones I've ordered might be a bit too long! I can probably shorten them to length though.