Page 1 of 1
Dolomite 1850 rear Engine Lifting Eye
Posted: Mon Sep 27, 2021 1:26 pm
by Odrider
Does anyone know the correct position for the rear lifting eye on the 1850 engine. I have the eye and want to refit it to remove the engine. Thanks
Re: Dolomite 1850 rear Engine Lifting Eye
Posted: Mon Sep 27, 2021 2:26 pm
by xvivalve
Can't see it in the parts book.
The Sprint one goes on the back of the head, so I suspect the 1850 is similar. Compare the bolt holes to those which hold the back cover on...
Re: Dolomite 1850 rear Engine Lifting Eye
Posted: Mon Sep 27, 2021 9:25 pm
by MIG Wielder
The front lifting eye is the same as the Sprint one on the front plate :- 155543.
The one further back on the 1850 is on the rear of the inlet manifold :- 153768.
If you have an engine lifting eye at the front of the exhaust manifold... that is interesting... like my 1850.
Tony.
Re: Dolomite 1850 rear Engine Lifting Eye
Posted: Tue Sep 28, 2021 9:48 am
by Odrider
Thanks all found a video on line showing position. Have now removed engine.