Page 1 of 1
Lumenition Chopper for 45D4 Dizzy
Posted: Sat Jul 30, 2022 2:55 pm
by Mad Mart
I want to fit a Lumenition PMA50 leccy ignition to a 44D4 dizzy. I have been reliably informed that it can be done using the FK117 fitting kit, a 45D rotor arm and an Ambassador dizzy cap (or maybe even the standard Sprint dizzy cap). I have a kit but the plastic "chopper" is missing. Does anyone have a spare, one I can borrow or who can make a fully dimensioned sketch so that I can make one?
Pic for reference only.
Re: Lumenition Chopper for 45D4 Dizzy
Posted: Sat Jul 30, 2022 5:25 pm
by Carledo
Ebay item number 372008430229 at £23.80. You get a spare 6 cylinder chopper with it which is only good for a T2000/PI etc (I have one too) but it gets the job done! Might be able to sell the unwanted one on via CT or somewhere like that.
I've dealt with this seller several times before, very reliable.
Steve
Re: Lumenition Chopper for 45D4 Dizzy
Posted: Sat Jul 30, 2022 8:55 pm
by BobM
Hi.
I had one distort and start clipping the module. Auotcar the manufacturers were very helpful and provided a spare for a small sum.
Give them a call on:- 0207 403 4334
BobM
Re: Lumenition Chopper for 45D4 Dizzy
Posted: Sat Jul 30, 2022 10:35 pm
by xvivalve
Re: Lumenition Chopper for 45D4 Dizzy
Posted: Wed Aug 03, 2022 11:33 am
by dursley92
I recently had a Lumenition optical switch fail on my Sprint engine and have now fitted a Pertronix so must have the "chopper" in my spares.
Let me know if you cannot find one.
Re: Lumenition Chopper for 45D4 Dizzy
Posted: Wed Aug 03, 2022 12:58 pm
by Mad Mart
Thanks Russ, no I can't find one.
Re: Lumenition Chopper for 45D4 Dizzy
Posted: Fri Aug 05, 2022 12:29 am
by dursley92
Mad Mart wrote: ↑Wed Aug 03, 2022 12:58 pm
Thanks Russ, no I can't find one.
OK I will have a look at my spares stuff in the morning.
Re: Lumenition Chopper for 45D4 Dizzy
Posted: Fri Aug 05, 2022 2:23 pm
by dursley92
Found it in my Lumenition spares, is this what you want?
Send me a pm with details and I can post it to you.
