Page 1 of 2
brake master cylinder
Posted: Mon Jul 31, 2023 3:17 pm
by joe69
Hi
WILL a triumph 1500 frd master dual line brake cylinder fit a 1300 rwd
Thanks
Joe
Re: brake master cylinder
Posted: Mon Jul 31, 2023 3:33 pm
by xvivalve
Someone may be along to correct me shortly, but I didn't think the 1500 fwd was ever fitted with a dual line cylinder...are you sure that's what you have?
Re: brake master cylinder
Posted: Mon Jul 31, 2023 3:48 pm
by joe69
Hi
No I have a 1300 dual but the lower piston is seized in , there is one advertised on ebay which they say is from a 1500 I just wanted to find out if it would fit
Re: brake master cylinder
Posted: Mon Jul 31, 2023 6:50 pm
by xvivalve
That's actually a LHD fitment. It can be made to fit but I understand one of the union positions is very close to the suspension turret
Join the Club for £30 and you can buy one of our's that is fully reconditioned and internally sleeved with stainless steel for longevity in exchange for your's.
Re: brake master cylinder
Posted: Tue Aug 01, 2023 6:00 am
by joe69
Hi
What sort of price are these
Thanks
Joe
Re: brake master cylinder
Posted: Tue Aug 01, 2023 8:09 am
by xvivalve
Hi Joe,
I edited the last post above to take the price off because as I typed it I received an order for the last one we had in stock. I’m due to pick up new stock from the reconditioner, hopefully tomorrow, but they’ve advised a cost increase. I’ll ring them later this morning and try to establish what the new price will be…
Re: brake master cylinder
Posted: Wed Aug 02, 2023 6:31 pm
by xvivalve
The tandem master cylinders have suffered a slight cost increase and are now £118 inc postage to UK addresses. New stock will now be with me sometime next week.
Re: brake master cylinder
Posted: Thu Aug 03, 2023 1:35 pm
by joe69
Hi Thanks
Are the pipe fittings on the left hand side if looking from the front I am just asking as my one has the pipe fittings on the left.I would therefore have to get a pipe flaring kit to redirect the pipes if not
Thanks
Joe
Re: brake master cylinder
Posted: Thu Aug 03, 2023 2:00 pm
by xvivalve
They are indeed on the left.
Re: brake master cylinder
Posted: Thu Aug 03, 2023 3:20 pm
by joe69
Hi yes I would like to join the club and buy one of your reconditioned cylinders
Thanks
Joe
Re: brake master cylinder
Posted: Fri Aug 04, 2023 1:21 pm
by joe69
HI
I have just sent the application form to join the club. Can you let me know when you get the recon master brake cylinders back in stock
Thanks
Joe
Re: brake master cylinder
Posted: Fri Aug 04, 2023 5:04 pm
by xvivalve
Will do Joe, welcome to the Club...
Re: brake master cylinder
Posted: Tue Aug 08, 2023 2:52 pm
by xvivalve
Hi Joe,
Tandem cylinders are now in stock...
Re: brake master cylinder
Posted: Tue Aug 08, 2023 5:21 pm
by joe69
Hi
Thanks
How do I go about buying one
Joe
Re: brake master cylinder
Posted: Tue Aug 08, 2023 5:42 pm
by xvivalve
If you haven't received your membership pack yet, I'll send you another PM...