Page 1 of 2
door handle gaskets
Posted: Sun Dec 10, 2023 11:32 am
by new to this
Does the club sell the outside door handle gaskets ?
i saw on ebay gaskets for Triumph 1300 TC will they fit a Sprint or maybe MGB gasket ?
Thanks Dave
Re: door handle gaskets
Posted: Mon Dec 11, 2023 10:11 am
by Tony Burd
Re: door handle gaskets
Posted: Mon Dec 11, 2023 10:20 am
by Mad Mart
Someone asked me about these recently. If someone has spares I can probably replicate them.
Re: door handle gaskets
Posted: Mon Dec 11, 2023 10:27 pm
by new to this
Ive ordered some from MGB I'll let you know how they fit when they arrive
Dave
thanks for replies
Re: door handle gaskets
Posted: Tue Dec 12, 2023 7:11 am
by gdc2john
Jag XJ6 ones fit
Re: door handle gaskets
Posted: Tue Dec 12, 2023 5:53 pm
by new to this
gdc2john wrote: ↑Tue Dec 12, 2023 7:11 am
Jag XJ6 ones fit
Are the XJ6 door handle gaskets made of rubber or cardboard ?
Thanks Dave
Re: door handle gaskets
Posted: Tue Dec 12, 2023 5:56 pm
by new to this
Tony
Are the jag gasket made of rubber or cardboard ?
The MG ones turned up but there a bit to small and there made of cardboard would sooner Rubber
Dave
Re: door handle gaskets
Posted: Wed Dec 13, 2023 12:51 am
by Sprintparts
Mad Mart wrote: ↑Mon Dec 11, 2023 10:20 am
Someone asked me about these recently. If someone has spares I can probably replicate them.
Would you be able to do a CAD file for 3D printing?
3D printed in TPU (flex) filament would be the go.
Thanks
Mark
Re: door handle gaskets
Posted: Wed Dec 13, 2023 9:03 am
by Tony Burd
new to this wrote: ↑Tue Dec 12, 2023 5:56 pm
Tony
Are the jag gasket made of rubber or cardboard ?
The MG ones turned up but there a bit to small and there made of cardboard would sooner Rubber
Dave
Hi Dave,
Thick paper like the originals.
Re: door handle gaskets
Posted: Wed Dec 13, 2023 9:16 am
by Tony Burd
Re: door handle gaskets
Posted: Wed Dec 13, 2023 2:20 pm
by Mad Mart
Sprintparts wrote: ↑Wed Dec 13, 2023 12:51 am
Mad Mart wrote: ↑Mon Dec 11, 2023 10:20 am
Someone asked me about these recently. If someone has spares I can probably replicate them.
Would you be able to do a CAD file for 3D printing?
3D printed in TPU (flex) filament would be the go.
Thanks
Mark
Yes, I can make a CAD file for 3D printing. I wasn't going to 3D print them but use my other half's Cricut machine. That's how I make my gaskets.
Re: door handle gaskets
Posted: Wed Dec 13, 2023 8:53 pm
by Sprintparts
Mad Mart wrote: ↑Wed Dec 13, 2023 2:20 pm
Sprintparts wrote: ↑Wed Dec 13, 2023 12:51 am
Mad Mart wrote: ↑Mon Dec 11, 2023 10:20 am
Someone asked me about these recently. If someone has spares I can probably replicate them.
Would you be able to do a CAD file for 3D printing?
3D printed in TPU (flex) filament would be the go.
Thanks
Mark
Yes, I can make a CAD file for 3D printing. I wasn't going to 3D print them but use my other half's Cricut machine. That's how I make my gaskets.
That is a nice way of doing them.
I have a 3D printer and and was thinking that making them in plastic means that they will last longer, not hold water and therefore take a potential rust spot away from the doors. 3D printed heaps of bits and pieces for the cars, just my CAD ability is limited.
Re: door handle gaskets
Posted: Thu Dec 14, 2023 9:17 am
by Mad Mart
I wasn't going to use gasket paper, probably neoprene or similar.
If you have anything that needs to be "CADed" Mark, give me a shout & I'll see what I can do.
Re: door handle gaskets
Posted: Thu Dec 14, 2023 5:09 pm
by new to this
Mad Mart wrote: ↑Thu Dec 14, 2023 9:17 am
I wasn't going to use gasket paper, probably neoprene or similar.
If you have anything that needs to be "CADed" Mark, give me a shout & I'll see what I can do.
Do you need a sample, ive ordered the XJ6 ones but also ordered some rubber gasket material
Dave
Re: door handle gaskets
Posted: Thu Dec 14, 2023 6:39 pm
by Mad Mart
new to this wrote: ↑Thu Dec 14, 2023 5:09 pm
Mad Mart wrote: ↑Thu Dec 14, 2023 9:17 am
I wasn't going to use gasket paper, probably neoprene or similar.
If you have anything that needs to be "CADed" Mark, give me a shout & I'll see what I can do.
Do you need a sample, ive ordered the XJ6 ones but also ordered some rubber gasket material
Dave
If you have a set you don't mind posting me, yes please.