Page 1 of 1
Clutch alignment tool - 3 rod
Posted: Sun Feb 16, 2025 4:52 pm
by Tallpaul
Anyone know where i might get one of these. Ta Paul
Re: Clutch alignment tool - 3 rod
Posted: Tue Feb 18, 2025 5:05 pm
by MIG Wielder
Hi Paul, I have one of these as used on an early 1850.
It is marked " TR1 07 MG " .
It has 10 splines dia 22mm
then 17 mm dia x 12mm long
and then 12mm dia x 33mm long.
Any use ?
Cheers for now,
Tony.
Re: Clutch alignment tool - 3 rod
Posted: Sun Feb 23, 2025 2:23 pm
by Tallpaul
Hi Tony im not sure of the sizes yet clutch should arrive tomorrow ( monday) ill chech splines if ok . Would you be prepared to sell it to me. Paul
Btw my car is a 74 1850
Re: Clutch alignment tool - 3 rod
Posted: Sun Feb 23, 2025 5:19 pm
by xvivalve
You should be able to buy a universal alignment tool with different diameter attachments to suit all clutch plates and covers from a decent auto spares shop or maybe Halfords.
Re: Clutch alignment tool - 3 rod
Posted: Sun Feb 23, 2025 6:19 pm
by Tallpaul
Ive seen those but would prfere the proper job if possible
Re: Clutch alignment tool - 3 rod
Posted: Sun Feb 23, 2025 10:08 pm
by MIG Wielder
Hi Paul, The one I have that fits my 1850 is an aftermarket one; like these ...
https://www.moss-europe.co.uk/en-gb/sea ... ue=triumph
There are many of them and at £7 you can't go far wrong.It's not a Churchill tool and you don't really need one for this application. If you are in Berkshire we could meet up for a quick swap but I would need the tool back as I know it fits my car.
HTH,
Tony.
Re: Clutch alignment tool - 3 rod
Posted: Sun Feb 23, 2025 10:49 pm
by xvivalve
I have such a universal tool and have used it successfully on a variety of classic and modern cars alike.
Re: Clutch alignment tool - 3 rod
Posted: Mon Feb 24, 2025 12:46 pm
by Tallpaul
Thanks for the offer Tony i have ordered one of those in the link
Paul