Sprint inlet fanimold?

[tinweevil]

<!--EZCODE LINK START--><a href="http://cgi.ebay.co.uk/TRIUMPH-DOLOMITE- ... dZViewItem" target="top">Don't fink so.</a><!--EZCODE LINK END--><br>
<br>
Julian

<p>1978 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/704">Dolomite Sprint</a><!--EZCODE LINK END--><br>
1972 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/754">Spitfire IV</a><!--EZCODE LINK END--><br>
1968 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/705">GT6 II</a><!--EZCODE LINK END--><br>
1973 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/755">Dolomite Sprint</a><!--EZCODE LINK END--><br>
1980 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/864">Dolomite 1500HL</a><!--EZCODE LINK END--></p><i></i>

[alun n]

Its a mirror image one; must be for that 32 valve stag engine<!--EZCODE EMOTICON START :lol --><img src=http://www.ezboard.com/images/emoticons/laugh.gif ALT=":lol"><!--EZCODE EMOTICON END-->

<p></p><i></i>

[MaddMart]

What am I missing, it looks like a Sprint manifold?

<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>

[MaddMart]

No, I give up..it's a sprint one.

<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>

[2F45T4U]

Ermmm HS6s got more than 3 holes on there mountings...

<p></p><i></i>

[SprintV8]

3 Bolt mounting's<br>
<br>
That's where the carb mount's fit which are 3 bolt's,The carb's then bolt to the 4 stud's the other side of the mount's.<br>
<br>
Seller's also flogging some carb's and linkage are these Sprint.<br>
Been so long since Ive seen a set of Standard Sprint Carb's?.

<p>1980 Dolomite SprintV8 (Soon to be shoehorned with a 360bhp of TVR AJP V8 Pumping Alloy !)<br>
2002 Citroen Xsara 2.0 HDi Estate.... Part's delivery Vehicle.<br>
They laugh at me because I am different. I laugh at them because they are all the same!)<br>
<br>
http://www.triumphowners.com/310 </p><i>Edited by: <A HREF=http://p206.ezboard.com/bthetriumphdolo ... printV8</A> at: 24/5/06 2:07 am<br></i>

[tinweevil]

I think you're right and I was wrong. I'm so used to seeing the 4 studs on the square flange I didn't recognise the bare manifold.<br>
<br>
Julian<br>


<p>1978 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/704">Dolomite Sprint</a><!--EZCODE LINK END--> Blue, a bit tetley.<br>
1972 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/754">Spitfire IV</a><!--EZCODE LINK END--> No name, in bits.<br>
1968 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/705">GT6 II</a><!--EZCODE LINK END--> Little blue, nice!<br>
1973 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/755">Dolomite Sprint</a><!--EZCODE LINK END--> VA41, seriously tetley.<br>
1980 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/864">Dolomite 1500HL</a><!--EZCODE LINK END--> Orange, current daily drive.</p><i></i>

[MaddMart]

Yep, carbs are HS6s.

<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>

[Jon Tilson]

to the seller this is defo a Sprint manifold and he said it used to go very well on his...<br>
so he may have polished it a bit then...<br>
He's sold a lot of Sprint gear so he knows his stuff.<br>
Jonners

<p></p><i></i>