trim clips

Locked
Message
Author
davepoth
Posts: 856
Joined: Tue Jan 20, 2004 9:46 pm

trim clips

#1 Post by davepoth » Sun Apr 04, 2004 3:17 pm

I decided to clean the interior of my car today. One thing led to another, and now most of the trim is in my mate's kitchen. The front door cards have been removed at some point, and now there are only 6 or 7 trim clips in each door. Apart from Robber's, is there anywhere I might get trim clips from?

<p></p><i></i>
Top
Matt Cotton
Posts: 55
Joined: Sun Sep 21, 2003 9:26 pm

Trim Clips

#2 Post by Matt Cotton » Sun Apr 04, 2004 3:26 pm

http://www.bresco.com<br>
<br>
As recommended by the club.<br>
<br>
Hope they can help

<p></p><i></i>
Top
mick the driver
Posts: 7
Joined: Tue Apr 29, 2003 1:16 pm

which ones

#3 Post by mick the driver » Sun Apr 04, 2004 4:00 pm

which trim clips are u after?

<p></p><i></i>
Top
davepoth
Posts: 856
Joined: Tue Jan 20, 2004 9:46 pm

Re: which ones

#4 Post by davepoth » Sun Apr 04, 2004 8:19 pm

The ones that hold the door cards to the doors. After an afternoon of 'working' with them, I now need a few more.<br>
And some other stuff.<br>


<p></p><i></i>
Top
alun n
Posts: 2404
Joined: Sat Mar 08, 2003 8:41 pm

Trim clips

#5 Post by alun n » Sun Apr 04, 2004 8:25 pm

I have a jam jar full of them. (No, they're not off PRO!)<br>
<br>
Let me know how many you need....

<p></p><i></i>
Top
davepoth
Posts: 856
Joined: Tue Jan 20, 2004 9:46 pm

Re: Trim clips

#6 Post by davepoth » Sun Apr 04, 2004 9:00 pm

Based on how many there were, how many were rusted through and broke when I pulled them out, and how many broke when I was putting them back in, I'd say the full 32. but after the afternoon I had I don't think I'll be pulling the door apart until I've got everything I need to sort them out properly. Thanks loads for your kind offer. I now owe you more pints.<!--EZCODE EMOTICON START :D --><img src=http://www.ezboard.com/intl/aenglish/im ... /happy.gif ALT=":D"><!--EZCODE EMOTICON END-->

<p></p><i></i>
Top
Gibbonz
Posts: 51
Joined: Wed Jan 28, 2004 8:22 am

Need some

#7 Post by Gibbonz » Mon Apr 05, 2004 8:44 am

trim clips too , the ones that hold the chrome strip on below the doors.<br>
Any ideas on a supplier 'anyone??

<p></p><i></i>
Top
MWU773V
Posts: 64
Joined: Tue Mar 02, 2004 9:28 pm

clips etc

#8 Post by MWU773V » Mon Apr 05, 2004 8:54 am

For Door card clips MOSS Europe are pretty good and as far as Outer trim clips go I have loads somewhere just confirm which ones you need and i'll try and sort some out for you. Best get the loft ladder out<br>


<p></p><i></i>
Top
davepoth
Posts: 856
Joined: Tue Jan 20, 2004 9:46 pm

Re: clips etc

#9 Post by davepoth » Mon Apr 05, 2004 6:21 pm

ooh ooh ooh!<br>
<br>
If you have them, I need the ones to hold the trim on the bootlid. Damn, my beer bill is gonna be as much as my car cost at this rate...<!--EZCODE EMOTICON START :D --><img src=http://www.ezboard.com/intl/aenglish/im ... /happy.gif ALT=":D"><!--EZCODE EMOTICON END-->

<p></p><i></i>
Top
Gibbonz
Posts: 51
Joined: Wed Jan 28, 2004 8:22 am

Thanks mwu773v

#10 Post by Gibbonz » Mon Apr 05, 2004 8:11 pm

The ones I need are Rimmers part number Ghf 1167<br>
I need about 6 or 8<br>
I am in NZ so paying for them and postage etc could be tricky.<br>
Could you email me on robgee@paradise.net.nz and we could perhaps sort something out.<br>
<br>
Ta<br>
Rob Gibson<br>
NZ

<p></p><i></i>
Top
MWU773V
Posts: 64
Joined: Tue Mar 02, 2004 9:28 pm

clips

#11 Post by MWU773V » Mon Apr 05, 2004 8:57 pm

I'll check that the clips I have are the right ones you want and be in touch, nice to hear from a fellow Gibson in NZ! <br>
<br>
Mark Gibson

<p></p><i></i>
Top
Locked

Return to “Bodywork & Trim”

Who is online

Users browsing this forum: Google [Bot] and 1 guest